738910
38
Zoom out
Zoom in
Previous page
1/58
Next page
36
GB
The appliance is not completely dis-
connected from the mains even after
being switched off. To do so, unplug.
When using the appliance, make sure
that the mains cable is not trapped or
crushed.
When unplugging the appliance from
the socket, always pull on the plug and
NOT the cable.
Disconnect the power plug from the
wall socket …
… if there is a fault,
… if you are not using the hand
blender,
… before you assemble the hand
blender,
… before you clean the hand blender
and
… during thunderstorms.
If there is visible damage to the knife or
the mains cable, do not use the knife.
To avoid any risk, do not make modifi-
cations to the product. The mains cable
should not be replaced by a non-spe-
cialist. Repairs should only be carried
out by a specialist workshop or the
Service Centre.
The appliance is not designed to be
operated with an external timer or a
separate telecontrol system.
RISK of injury from cuts
Never reach inside when the blades
are rotating. Do not hold spoons or
similar items in rotating parts. If your
hair is long, make sure it does not get
caught. The same applies to loose
clothing.
The blade continues to run after the
appliance is switched off. Wait until the
appliance comes to a standstill before
removing the hand blender from the
mixture.
WARNING about material damage
After a maximum operating time of …
… 1 minute without interruption with
firm mixtures and
… 2 minutes without interruption with
liquid mixtures
the prescribed switch-off time is 30 min-
utes.
To prevent damaging the appliance,
always stop mixing when the blade is
no longer turning or has slowed down.
Unplug and check whether something
is blocking the container or the food is
too tough. Also check whether the
appliance has been properly assem-
bled.
Only use genuine accessories.
The appliance is not suitable for chop-
ping very hard food such as nutmeg,
cereals, coffee beans or spices. Choco-
late cannot be worked in it, either.
Do not use harsh or abrasive cleaning
agents.
2. Items supplied
1 motor part 5
1 wall mount with fixing material 10
1 blender 8
1 operating manual
3. Assembly
Clean the appliace as described in
chapter "Cleaning" on page 38.
DANGER! Only plug the mains
plug 2 into a socket when the mo-
tor part 5 is attached to the blend-
er 8.
__RP66867_B5.book Seite 36 Donnerstag, 5. Mai 2011 11:12 23
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 600 A1 IAN 66867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 600 A1 IAN 66867 in the language / languages: Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSM 600 A1 IAN 66867

Silvercrest SSM 600 A1 IAN 66867 User Manual - German - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info