576593
8
Zoom out
Zoom in
Previous page
1/83
Next page
- 5 -
Unpacking
Remove all packaging materials or protective fo-
ils from the appliance. Retain the packaging, so
that you can store the appliance with protection
or send it by post, e.g. should it need repair.
Before taking the appliance into use, check to
ensure that it is free of damage, check also that
the power cable and plug as well as all accesso-
ries and appliance parts are undamaged.
Carefully clean all components before
taking the appliance into use for the first time
(see “Cleaning”).
Preparing for use
When all components have been cleaned as described
under “Cleaning”:
Position the appliance such that, ...
that the power cable
y
passes through the re-
cess at the rear of the appliance,
the power plug is immediately accessible, so that
it can be quickly withdrawn in the event of danger,
that it is stable and not liable to slip, and such
that the suction cups find a firm hold so that the
appliance cannot tip over due to vibration,
that the power cable
y
is not in the working
area and thus not presenting a risk of being inad-
vertently snagged and tipping the appliance
over.
Operation
ƽ
Warning!
The motor switches itself off as soon as the mixer
jug
e
is removed from the motor block
u
. It could
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixer jug
e
is replaced on it:
Therefore:
First insert the power plug into the wall socket
when the mixer jug
e
is filled and mounted with
its lid fitted and closed.
Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
Before removing the mixer jug
e
, switch the ap-
pliance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
Take the mixer jug
e
from the motor block
u
and remove the cover
w
.
Fill the mixer jug
e
and then press the cover
w
firmly back onto the mixer jug
e
. Ensure that the
pourer nose on the mixer jug
e
is also closed.
Insert the filling cap
q
into the lid opening and
secure it by turning it clockwise.
Place the ready filled and sealed mixer jug
e
onto the motor block
u
. Lightly turn the mixer
jug
e
until you can press it down. The motor
can start only when the mixer jug
e
is securely
positioned.
Selecting operating speeds
When the mixer jug
e
is filled, completely sealed
and securely fitted to the motor block
u
, you can
then switch the appliance on.
IB_100484_SSM550D1_FI_DK_BE.qxp 29.04.2014 7:43 Uhr Seite 5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 550 D1 - IAN 100484 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 550 D1 - IAN 100484 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info