634212

Silvercrest SSM 550 A1 - IAN 66711 Manual

40
Zoom out
Zoom in
Previous page
1/52
Next page
- 38 -
If you clean the liquidiser directly after use, you can
often achieve a satisfactory and hygienic level of
cleaning with the following alternative:
³
Fill the liquidiser
e
with 750 ml of water and add
a few drops of mild detergent. Close the lid
w
and place the liquidiser
e
on the motor block
u
.
Insert the plug into a mains power socket and
activate the Ice Crush/Clean switch a couple of
times, causing the cutters
r
to plough through
the water with maximum revolutions.
Afterwards, rinse the liquidiser
e
out with lots of
clear water, so that all detergent residues are re-
moved.
Should this not dislodge the soiling, you can separate
the lower plastic part of the mixer jug
e
(with the cut-
ters
r
) from the the glass part:
³
Remove the mixer jug
e
from the motor block
u
.
³
Turn the plastic element of the mixer attach-
ment
e
anti-clockwise, such that it allows itself to
be released from the glass element .
Attention!
Take care with the cutters . They are very sharp.
Risk of injury!
³
Clean both parts thoroughly in a mild soapy
solution or in a dishwasher.
³
Replace the plastic part of the mixer jug
e
back onto the glass part . Ensure that the sea-
ling ring is correctly fitted.
Cleaning the motor block
³
Use a dry cloth or, at the most, a lightly moistened
one for cleaning the plastic surfaces.
³
At every cleaning check that the contact switch
in the receptor for the mixer jug
e
is not blok-
ked by soiling residues. If you cannot dislodge
any blockages with the corner of a piece of pa-
per, make contact with Customer Services. Un-
der no circumstances should you use a hard ob-
ject, this could damage the contact switch.
³
Remove any possible residues on the underside
of the motor block
u
only with a dry cloth or a
stiff bristled brush. Ensure that nothing can enter
through the ventilation opening of the appliance.
After cleaning
Allow all parts to dry well before re-assembling and
re-using the liquidiser.
Storage
³
If you do not intend to use the liquidiser for an
extended period, clean it thoroughly (see chapter
"Cleaning").
³
Wrap the power cable
y
around the cable sto-
rage
i
on the base of the motor block
u
.
³
Store the liquidiser at a cool and dry location.
IB_66711_SSM550B1_LB5 28.04.2011 13:45 Uhr Seite 38
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 550 A1 - IAN 66711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 550 A1 - IAN 66711 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SSM 550 A1 - IAN 66711

Silvercrest SSM 550 A1 - IAN 66711 User Manual - German, Dutch, French, Italian - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info