576739
29
Zoom out
Zoom in
Previous page
1/34
Next page
26
SSM 180 A1
GB
NOTE
If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, hold the
blade holder 4 together with the blender
jug 1 and the base 5 so that they do not
come apart.
ATTENTION! DAMAGE TO PROPERTY!
Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
8) When the smoothie is ready, turn the blade
holder 4 until the arrow on the base 5 points
to the
symbol on the blade holder 4 and
remove the blade holder 4 with the attached
blender jug 1.
9) Turn the blender jug 1 over and unscrew the
blade holder 4.
10) Screw the lid 2 off the blender jug 1. You
can drink the smoothie through the drinking
opening on the lid 2.
You can now prepare a second smoothie using
the second blender jug 1.
Cleaning and care
DANGER – ELECTRIC SHOCK!
Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
NEVER submerse the base 5 in water or
other fl uids!
It is best to clean the appliance directly after use.
This makes food residues easier to remove.
ATTENTION! DAMAGE TO PROPERTY!
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
Wipe the base 5 with a moist cloth. For stubborn
soiling use a mild detergent on the cloth.
Wipe off any detergent residue with a cloth
moistened with clean water.
Clean the blender jug 1, the blade holder 4
with blade 3 and the lid 2 in warm water with
a little mild detergent. Afterwards, rinse all parts
with clean water so that no detergent residues
remain.
NOTE
If you clean the appliance directly after use, you
will usually achieve suffi ciently hygienic cleaning
results for the blender jug 1 and the blade
holder 4 by using the following alternatives:
Fill the blender jug 1 with 400 ml of water
and add a few drops of mild detergent.
Attach the blade holder 4 and screw both
onto the base 5.
Press the start button 6 a few times so that
the blade 3 ploughs through the water.
Afterwards, rinse the blender jug 1 and the
blade holder 4 with plenty of clear water
so that all detergent residues are removed.
After cleaning, dry all parts thoroughly.
NOTE
You can also clean the lid 2, the blender
jug 1 and the blade holder 4 in your
dishwasher. Place the parts, where possible,
in the upper basket and ensure that none of
the parts can get stuck. Otherwise they could
become deformed.
Storage
Store the cleaned appliance in a clean, dust-free
and dry location.
IB_96281_SSM180A1_LB2.indb 26IB_96281_SSM180A1_LB2.indb 26 03.02.14 15:5403.02.14 15:54
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSM 180 A1 - IAN 96281 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSM 180 A1 - IAN 96281 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info