633594

Silvercrest SSK 300 A1 - IAN 91022 Manual

11
Zoom out
Zoom in
Previous page
1/88
Next page
8
SSK 300 A1
GB
IE
9) To interrupt the cooking process, press the BOIL/
STEAM button q or the ON/OFF button e.
10) Remove the lid 2 carefully.
11) Remove the egg insert 7 from the blender
jug 3.
Heat-up
You can also reheat soups that you have made
earlier with the appliance.
NOTE
► Before using the HEAT-UP function, the blender
jug
3 must be cleaned thoroughly. Ensure
that no food residue remains at the bottom
of the appliance.
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Pour in the soup to be heated up.
3) Press the ON/OFF button e. The appliance
emits an acoustic signal. All control lamps
fl ash.
4) Press the HEAT-UP button r. Two signal tones
will confi rm your selection and the corresponding
signal lamp will fl ash.
The heating of the soup now takes place automatic-
ally: The appliance heats and mixes alternately.
As soon as the heating process is complete, the
appliance will stop automatically.
NOTE
► You can stop the heating process at any time
b
y pressing the ON/OFF button e or the
HEAT-UP button r. The control lamp then
goes off and the appliance switches itself off .
Cleaning and care
It is best to clean the appliance as soon as it has
cooled down after each use. Dried-on food residue
is more diffi cult to remove.
Cleaning the blender jug
DANGER – ELECTRIC SHOCK!
► Ensure that no liquids come into contact with
the electrical connector on the blender jug 3!
NEVER immer
se the blender jug 3 in
water or other liquids! Otherwise there
is a risk of an electric shock.
WARNING! RISK OF INJURY!
► Take care when cleaning the blender jug 3.
The blade 4 is v
ery sharp!
1) Insert the plug into a mains power socket.
The appliance emits an acoustic signal.
2) Add a little warm water and a drop of
washing up liquid to the blender jug 3.
3) Close the lid 2.
4) Press the ON/OFF button e.
5) Press the PULSE button t and allow the
appliance to run for about 1 minute.
6) Remove the plug from the mains power socket.
7) Remove stubborn remains using the cleaning
brush 8 or the cleaning sponge 0. The narrow
side of the cleaning brush 8 is particularly
well-suited to removing food residue from the
bottom of the appliance.
8) Afterwards, empty the container and rinse it
out thoroughly with clear water.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SSK 300 A1 - IAN 91022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSK 300 A1 - IAN 91022 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info