Manual Silvercrest SSC 200 A1 - IAN 114257 (page 50 of 62) (English, German, French, Italian)

740618

Zoom out

Zoom in

1/62

~ The lid1 and cooking pot3 …

… are fragile. Handle them carefully.

… may crack if exposed to sudden tem-

perature changes. So allow both to

cool before immersing them in water.

… are not suitable for roasting, or for

use in ovens, microwaves, freezers

or food warmers.

~ The appliance and accessories may not

be put in a microwave oven.

~ If you serve the finished dish in the hot

cooking pot3, place a heat resistant ta-

ble mat underneath it to prevent mark-

ing the table top.

~ Never place the device on hot surfaces

(e.g. hob plates) or near heat sources or

open fire.

~ Only use the original accessories.

~ The device is fitted with non-slip silicon

feet. Because furniture can be coated

with a wide variety of varnishes and

plastics, and treated with various care

products, the possibility cannot be ex-

cluded that some of these substances

have ingredients that may attack and

soften the silicon feet. If necessary,

place a non-slip mat under the device.

~ Do not use any astringent or abrasive

cleaning agents.

4. Items supplied

1 base5

1 ceramic cooking pot3

1 lid1

1 operating instructions

Unpacking

1. Remove all parts from the packaging.

2. Check that all parts are present and in-

tact.

5. Before using for the

first time

FIRE HAZARD! Before turning the

device on, place it on a level, sta-

ble, dry, heat-resistant surface.

DANGER! Risk of injury

through burning!

The surfaces of the device become

very hot during operation. While

the device is in operation, only

touch the control knob7, lid han-

dle2 or device handles4.

NOTE: as the appliance is supplied with a

thin film of grease, there might be a small

amount of smoke and odour the first time

it is used. This is not harmful and will stop af-

ter a short while. Please ensure adequate

ventilation during this process.

• Clean the appliance before using

it for the first time (see “Clean-

ing” on page 53)!

1. Place the appliance on a level, dry,

non-slip surface so that the appliance

can neither fall over nor slide off.

2. Stand the cooking pot3 in the base5.

3. Pour half a litre of water into the cook-

ing pot3.

4. Place the lid1 on the cooking pot3.

5. Insert the plug into a suitable earthed

socket.

6. Turn the control knob7 to the setting

“HIGH”.

7. The indicator light6 will come on and

the appliance will begin heating up.

8. Allow the appliance to operate switched

on for approximately 60minutes.

9. Switch the appliance off by turning the

control knob7 to “OFF”.

10. Disconnect the mains plug.

11. Let the appliance cool down and then

clean it again. The appliance is now

ready to use.

BB53B6ORZ&RRNHUB%ERRN6HLWH0RQWDJ-XQL

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SSC 200 A1 - IAN 114257 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SSC 200 A1 - IAN 114257 Manual

Product: