663296
99
Zoom out
Zoom in
Previous page
1/112
Next page
97
GB
Wet cleaning of the blade unit
The shaving heads|4 of the shaving attachment|5 can be
cleaned with water.
1. Press the release button|6 on the shaving attachment|5, so
that the blade unit|4 opens.
2. Clean the blade unit|4 under running water. Allow the water
to flow through the shaving heads|4 from the inside to the
outside.
3. Allow the parts to dry completely.
4. Close the blade unit|4, so that it clicks into place.
Thorough cleaning of the blade unit
An integrated timer in the device adds up shaving times. After a
shaving period of 30 minutes, the cleaning symbol|13 starts
flashing. It reminds you of the thorough cleaning that you should
regularly perform. If you switch off the device while the cleaning
symbol is flashing, the timer will start counting shaving times
again from the beginning.
1. Press the release button|6 on the shaving attachment|5, so
that the blade unit|4 opens.
2. Figure D: pull the blade unit|4 off the shaving attach-
ment|5 by overextending it.
3. Figure E: carefully turn the locking wheel|17 marked with
arrows against the direction of the arrows, until the holder of
the shaving heads|18 can be lifted off.
4. Clean all parts under running water, and then allow them to
dry completely.
5. Reassemble the blade unit|4.
6. Figure F: carefully turn the locking wheel|17 in the direc-
tion of the arrows, until the holder of the shaving heads|18
can no longer be lifted off.
BB1$6B%ERRN6HLWH'LHQVWDJ1RYHPEHU
99


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-srr-3.7-b1---ian-278224

Reset search

  • Bonjour,

    Où puis-je trouver les têtes de rasoir silver crest rotary shaver SRR 3.7 B1 ?

    Merci pour votre retour.

    E. Denet Submitted on 10-2-2022 at 15:27

    Reply Report abuse
  • Bonjour,

    Où puis-je me procurer les têtes de rasoir compatible avec le silver crest rotary shaver SRR 3.7 B1 ?

    Merci pour votre retour

    E. DEnet Submitted on 10-2-2022 at 15:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SRR 3.7 B1 - IAN 278224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SRR 3.7 B1 - IAN 278224 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info