739800
63
Zoom out
Zoom in
Previous page
1/70
Next page
SRGS 1300 A2 61
5. Before using for the first time
During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can
evaporate.
Note: When heating up for the first few
times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the accessory
parts out of the packaging.
2. Check that the appliance shows no signs
of damage.
3. Remove any labels or stickers (but not
the type plate on the underside).
4. Clean the appliance before using it for
the first time. Observe the information in
the section entitled "7. Cleaning" on
page 63.
5. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
6. Turn the temperature regulator 5 to "0".
This switches the appliance off.
7. Plug the mains plug into a suitable mains
socket that corresponds to the technical
data.
8. Turn the temperature regulator 5 to MAX.
The indicator lamp 3 lights up and the
appliance heats up.
9. Leave the appliance switched on for
around 10 - 15 minutes.
10. Switch the appliance off by turning the
temperature regulator 5 to "0".
11. Take out the mains plug and allow the
appliance to cool down.
12.Clean the appliance again. Observe the
information in the section entitled
"7. Cleaning" on page 63.
6. Operation
6.1 Preparing the appliance
1. Select a location that is firm, level and
not flammable. Maintain a distance of
approx. 50 cm from other objects.
2. Turn the temperature regulator 5 to "0".
This switches the appliance off.
3. Grease the raclette pans lightly 7 on the
inside.
Note: Use kitchen paper dipped in a
little cooking oil.
4. Lightly grease the top surface of the
stone grill plate 1 and grill plate 2.
Note: Do not use too much oil as this
could catch fire and burn. Spread the oil
carefully using a cooking brush or
kitchen paper.
5. Place the stone grill plate 1 and grill
plate 2 on the appliance.
Note: The grooves on the stone grill
plate 1 must face up. The grill plate 2
can be used on both sides.
6. Plug the mains plug into a suitable mains
socket that corresponds to the technical
data.
7. Turn the temperature regulator 5
clockwise to MAX.
RP75604 Raclette hs LB1 Seite 61 Freitag, 27. Juli 2012 11:14 11
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SRGS 1300 A2 IAN 75604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SRGS 1300 A2 IAN 75604 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info