796299
23
Zoom out
Zoom in
Previous page
1/164
Next page
SilverCrest SPWE 180 A2
English - 21
7. Getting started
7.1 Switching on the scales / measuring weight
The bathroom scales must be calibrated before first use or after having been
moved to ensure that they can determine one's weight exactly. To do so, step
briefly on to the tread (2), step off it again and wait until the bathroom scales
switch off automatically. The bathroom scales are now calibrated.
Due to the Step-On-Power function, the bathroom scales are switched on automatically when you
step on the tread (2) and they start to measure your weight immediately.
In their original state, the bathroom scales is set to the "kg" unit of weight. To change the unit of
weight, press the “Button for Setting the Weight Unit” (3). The selected unit of weight is then indicated
on the LCD display (1).
Stand on the tread (2) of the bathroom scales so that your weight is evenly distributed. Remain as
still as possible during the weighing process as the measurement result may be distorted otherwise.
The measurement result is indicated on the LCD display (1) during the weighing process. The
measurement is complete when the display flashes three times.
A solid surface is required to measure weight correctly. Thus always place
the bathroom scales on a solid, horizontal floor covering and never on
carpet. This can distort the measurement result.
To obtain comparable measurement results, you should always weigh
yourself if possible at the same time of day (preferably in the morning).
Always weigh yourself if possible under the same conditions: on an empty
stomach, after having gone to the toilet and naked.
Please note that values for the stone unit of weight are not represented as
decimal values. The display is divided into two segments by a colon. Only
whole numbers are displayed in the "st" unit of weight to the left of the colon.
The remaining weight is displayed in the "lb" unit of weight to the right of the
colon.
Example: "6: 8.0 st" is shown on the display. This corresponds to 6 st and 8
lb.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SPWE 180 A2 - IAN 384416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPWE 180 A2 - IAN 384416 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info