Manual Silvercrest SPU 900 A1 (page 12 of 62) (English, Danish, Swedish, Finnish)

517989

Zoom out

Zoom in

1/62

- 10 -

Should the second user be activated, the

“B” indicator appears in the display g.

6. Repeat the steps 1 - 4 (for both users) until

all desired radio stations have been saved.

AMS (Automatic Memory System)

With the AMS function the radio searches au-

tomatically for radio stations and then saves

them to the memory positions.

• Press and hold the button A.M.S. MEM-

ORY h for two seconds. The radio alarm

automatically searches for suciently

powerful radio stations and saves them in

the memory.

Accessing the station

1. To recall a saved radio station, in Radio

mode rst select the desired user.

2. Now select the required memory page

with the PAGE/AL.SET button f.

3. Using the PRESET/ALARM +/- button s/

d, select the desired memory space for

the radio station.

Adjusting the volume.

• In radio modus, repeatedly press the but-

ton VOL — q to reduce the sound volume.

To the right in the display g the current

sound volume setting is indicated in steps

from V 0 - 18.

• Repeatedly press the button Vol. + w to

increase the sound volume.

Switch-off Timer

This appliance is tted with a switch-o timer

for up to 90 minutes.

1. Press the button SLEEP j to call the func-

tion up and, if need be, to switch the ra-

dio on.

2. Repeatedly press the button SLEEP j to

enter in the remaining playing time in steps

of 10 minutes. After a few seconds, the

frequency is indicated once again.

3. In the display g the Sleep indicator ap-

pears

4. At any time you can press the SLEEP

button j to blend in the remaining

countdown time for a few seconds.

5. On expiry of the time period the ap-

pliance switches itself o.

6. To switch the timer o prematurely,

press the

l button.

Switching and dimming the display

You can adjust the display brightness in

three levels by pressing the SNOOZE/DIM-

MER button y. The higher the brightness,

the greater is the power consumption of the

device.

When you brieﬂy press the MODE/LOCK

button e during radio operation, you can

toggle between frequency and time display.

Projection

The time can be projected from the appliance

onto a wall or the ceiling. This function is in-

tended for reading the time in darkness.

During the day in well lit rooms you will

hardly be able to use the projection facility.

When projection is switched on, the projection

symbol glows in the display g.

1. For this, rst fold the projector t out.

2. Switch the function on with the PROJEC-

TION button a.

3. Direct the projector t onto the desired

surface area. Before you can turn the pro-

jector t - if so desired - to the side, you

must carefully pull its base up from the

device housing.

4. Using the focus regulator 1( sharpen the

image.

5. The time will now be projected onto the

desired surface area for the pre-adjusted

timespan (see section "Adjusting the Pro-

jection duration").

6. Should you wish to switch this function o

prematurely, press the PROJECTION but-

ton a and fold the Projector t in.

Button lock

Press and hold the MODE/LOCK button e

until the key symbol is indicated in the dis-

play g. The normal key functions are now

blocked. The buttons retain, however, the

function “Alarm stop”. In addition, the

BDA_SPU 900 A1 - DT-67087_3_en.indd 10 19.07.2011 21:23:54

My silver crest alarm clock projector has suddenly stopped showing the display any help please Submitted on 28-12-2021 at 12:32
Reply Report abuse
radio shows frequency but is not audible although volume is on. how to reset all to factory settings Submitted on 25-8-2020 at 09:23
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPU 900 A1 in the language / languages: English, Danish, Swedish, Finnish as an attachment in your email.

The manual is 1,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SPU 900 A1

Silvercrest SPU 900 A1 User Manual - German, Dutch, French, Italian - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SPU 900 A1 Manual

Product: