663553
12
Zoom out
Zoom in
Previous page
1/130
Next page
9
SPM 2000 B2
GB
IE
Handling and operation
This section provides you with important information on handling and using the
appliance.
Before initial use
Clean all accessories as described in the section “Cleaning” to remove any
possible production residues.
Read these operating instructions carefully.
Set up the appliance in accordance with the safety instructions.
Open the safety catch 4 by moving the slider from the position to the
position.
Clean the appliance with a damp cloth as described in “Cleaning and Care”.
Close the appliance.
Insert the mains cable plug 3 in a properly connected and earthed mains
power socket which supplies the voltage stated in the”Technical data” section.
Allow the appliance to heat up for about 5 minutes on the maximum temperature
setting by turning the heat level control 2 as far as the right-hand stop.
NOTE
The fi rst time the appliance heats up, a small amount of smoke and odour
may be generated due to production-related residue. This is normal and is
completely harmless. Provide suffi cient ventilation; for example, by opening
a window.
After heating, pull the plug out of the mains socket and allow the appliance to
cool down completely.
Clean the appliance again with a damp cloth.
Operation
Close the appliance lid using the handle 6.
Slide the fat collector tray 7 into the appliance.
Replace the plug in the mains mains power socket. The green “Ready” control
lamp 5 lights up when the heat level control 2 is set to “0” (
).
Set the desired level on the heat level control 2. The green “Ready” control lamp
5 goes out and the red “Power” control light 1 lights up. As soon as the set heat-
ing level has been reached, the red “Power” control light 1 goes out and the
green “Ready” control lamp 5 lights up again.
IB_104005_SPM2000B2_LB3.indb 9IB_104005_SPM2000B2_LB3.indb 9 16.01.15 10:1416.01.15 10:14
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SPM 2000 B2 - IAN 104005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPM 2000 B2 - IAN 104005 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info