Manual Silvercrest SPM 2000 A2 - IAN 29604 (page 26 of 30) (English, German, Dutch)

663554

Zoom out

Zoom in

1/30

- 23 -

Commissioning

1. Take the appliance out of the packaging. Remove

all additional transport packing, e.g. plastic wrap

or cable holders.

2. Before the first usage, check that all items have

been delivered and there are no visible damages.

3. Read these operating instructions carefully.

4. Set up the appliance according to the safety

instructions.

5. Open the safety closure 4 .

6. Clean the appliance with a damp cloth as de-

scribed in "Cleaning and Care".

7. Close the appliance.

8. Insert the plug into a power socket and allow the

appliance to heat up at its maximum temperature

setting for approx. 5 minutes.

Note:

Due to manufacturing residues, this initial heating up

could result in a light production of odour and smoke.

This is completely normal and is not dangerous.

Provide for sufficient ventilation, for example, open

a window.

9. After being heated up, remove the plug from

the wall socket and allow the appliance to

cool down.

10. Clean the appliance once more with a damp

cloth.

Operation

1. Close the appliance lid at the handle 6.

2. Push the grease catchment tray 7 into the app-

liance.

3. Insert the plug into a mains power socket. The

green control lamp "Ready" 5 illuminates if the

heat level regulator 1 is set to "0".

4. Set the required heat level using the heat level

regulator 1. The green control lamp "Ready" 5

goes out and the red control lamp "Heat up" 2

illuminates. As soon as the set temperature level

is reached, the red control lamp "Heat up" 2

goes out and the green control lamp "Ready" 5

illuminates again.

Note:

The green control lamp “Ready“ 5 also lights up

when the heat level regulator 1 is at position „0“.

As soon as you have set the heat level regulator 1

to the required position, the green control lamp

“Ready” 5 will go off until the desired temperature

has been attained.

Note:

From time to time, the green control lamp “Ready”

5 may go out again and the red control lamp

"Heat up" 2 illuminates again. This means that the

temperature of the appliance has dropped below

the programmed setting, and it is automatically hea-

ting itself up again!

5. Open the appliance lid and place the foodstuff

to be toasted/grilled on the lower hotplate 9.

6. Close the appliance lid using the handle 6.

Due to the positioning of the upper hotplate 9

being variable, even with thick items it is always

parallel to the lower hotplate 9. This ensures an

optimal cooking result.

7. After a short period check the browning of the

foodstuff. To do this, open the appliance lid

using the handle 6.

IB_29604_SPM2000A2_DE_AT_NL.qxp 05.11.2013 14:49 Uhr Seite 23

DIN A5 148 mm x 210 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPM 2000 A2 - IAN 29604 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SPM 2000 A2 - IAN 29604 Manual

Product: