583570

Silvercrest SPM 2000 A2 - IAN 29604 PANINI-GRILL Manual

26
Zoom out
Zoom in
Previous page
1/30
Next page
- 23 -
Commissioning
1. Take the appliance out of the packaging. Remove
all additional transport packing, e.g. plastic wrap
or cable holders.
2. Before the first usage, check that all items have
been delivered and there are no visible damages.
3. Read these operating instructions carefully.
4. Set up the appliance according to the safety
instructions.
5. Open the safety closure 4 .
6. Clean the appliance with a damp cloth as de-
scribed in "Cleaning and Care".
7. Close the appliance.
8. Insert the plug into a power socket and allow the
appliance to heat up at its maximum temperature
setting for approx. 5 minutes.
Note:
Due to manufacturing residues, this initial heating up
could result in a light production of odour and smoke.
This is completely normal and is not dangerous.
Provide for sufficient ventilation, for example, open
a window.
9. After being heated up, remove the plug from
the wall socket and allow the appliance to
cool down.
10. Clean the appliance once more with a damp
cloth.
Operation
1. Close the appliance lid at the handle 6.
2. Push the grease catchment tray 7 into the app-
liance.
3. Insert the plug into a mains power socket. The
green control lamp "Ready" 5 illuminates if the
heat level regulator 1 is set to "0".
4. Set the required heat level using the heat level
regulator 1. The green control lamp "Ready" 5
goes out and the red control lamp "Heat up" 2
illuminates. As soon as the set temperature level
is reached, the red control lamp "Heat up" 2
goes out and the green control lamp "Ready" 5
illuminates again.
Note:
The green control lamp “Ready“ 5 also lights up
when the heat level regulator 1 is at position „0“.
As soon as you have set the heat level regulator 1
to the required position, the green control lamp
“Ready” 5 will go off until the desired temperature
has been attained.
Note:
From time to time, the green control lamp “Ready”
5 may go out again and the red control lamp
"Heat up" 2 illuminates again. This means that the
temperature of the appliance has dropped below
the programmed setting, and it is automatically hea-
ting itself up again!
5. Open the appliance lid and place the foodstuff
to be toasted/grilled on the lower hotplate 9.
6. Close the appliance lid using the handle 6.
Due to the positioning of the upper hotplate 9
being variable, even with thick items it is always
parallel to the lower hotplate 9. This ensures an
optimal cooking result.
7. After a short period check the browning of the
foodstuff. To do this, open the appliance lid
using the handle 6.
IB_29604_SPM2000A2_DE_AT_NL.qxp 05.11.2013 14:49 Uhr Seite 23
DIN A5 148 mm x 210 mm
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SPM 2000 A2 - IAN 29604 PANINI-GRILL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPM 2000 A2 - IAN 29604 PANINI-GRILL in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info