740066

Silvercrest SPM 200 A1 IAN 89212 Manual

60
Zoom out
Zoom in
Previous page
1/70
Next page
58
12.Switch both switches 5 to "OFF".
Caution! Before you extrude the pasta
dough, you need to leave both
switches 5 on "OFF" for at least
5 seconds to allow the dough to rest.
13.Place a container under the appliance to
catch the pasta.
14.Switch both switches 5 to "EXT".
The pasta is now extruded.
15.Use dough scraper 15 to cut the pasta
to the desired length directly at
attachment 12.
16.As soon as all the dough has been
extruded, switch both switches 5 to
"OFF".
Note: For technical reasons, a small
quantity of dough is always left behind
in dough compartment 6.
17. If you want to make a second portion of
pasta, remove the rest of the dough from
dough compartment 6.
Note: Weigh the remaining quantity
you have removed and reduce the total
quantity of ingredients for the second
batch of dough accordingly. You can
then add the remaining quantity of the
first batch of dough to the second batch
without exceeding the maximum total
quantity of approximately 520 g.
18.Proceed in the same way with the
second batch of dough as with the first.
19. When you have finished, take the plug
out of the socket.
Caution!
To prevent dough residues drying on, you
must dismantle the appliance immediately
after use. If dough residues dry on, it can
become difficult or even impossible to
dismantle the appliance.
20.Dismantle the appliance (see
“6.1 Dismantle appliance” on
page 55).
21. Clean the appliance and the accessories
(see “10. Cleaning the appliance” on
page 62).
8. Pasta recipes
8.1 Tips on making pasta
• Semolina, spelt flour, special pasta flour
or instant flour (low-protein plain flour)
are especially suitable for making pasta.
• The total quantity of flour and liquid
should always be between 480 g and
520 g. The appliance works best with
this. A smaller quantity means the
ingredients will not be properly
kneaded, whilst a larger total quantity
may cause dough to be forced out of the
dough compartment.
• Less than 3 minutes' kneading time will
lead to ingredients not being properly
mixed.
• More than 5 minutes' kneading time will
lead to the dough getting too warm and
sticky.
• Spread the pasta out on a clean cloth
after removing it from the machine to
stop it sticking together.
• Herbs are to colour the pasta; they lose
their flavour when the pasta is cooked.
• You can dry the pasta to make it keep
longer. To do this, spread out the pasta
on a clean cloth and air-dry for a day or
RP89212 Pasta Maker LB2 Seite 58 Mittwoch, 29. Mai 2013 11:35 11
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SPM 200 A1 IAN 89212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPM 200 A1 IAN 89212 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info