679262
41
Zoom out
Zoom in
Previous page
1/176
Next page
34 
GB
IE
SPLB 44 A1
Setting up the device
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
Place the device on a firm, flat and level surface.
The surfaces of some items of furniture might contain components that can
corrode and soften the rubber feet of the device. If necessary, place a mat
under the device's rubber feet.
Do not operate the device in a hot, wet or extremely damp environment.
Keep a minimum distance of 30 cm to heat-emitting devices such as heaters,
ovens, etc.
Operate the device only in locations with adequate ventilation.
The mains socket must be easily accessible so that the plug can be easily
pulled out in an emergency.
To achieve optimum sound, place the device on its side.
Connecting the power supply
CAUTION!
Before connecting the device, compare the connection data (voltage and
frequency) on the device rating plate with that of your mains power supply.
This data must agree so that the device is not damaged.
Make sure that the mains cable is
not damaged and is not routed over
hot surfaces and/or sharp edges.
Connect the plug of the mains cable
to the mains connection socket
for the power supply on the rear of the device and plug the mains plug
into a mains socket. Ensure that the mains cable is not taut or kinked.
Route the mains cable
so that no one can stumble over it.
Do not place the device, furniture or any other objects on the cable. Do not
kink the cable or knot it and do not connect it to other cables. Never wrap
the cable tightly around other objects otherwise the conductors inside the
cable could break and cause a malfunction.
Unwinding the FM wire aerial
Completely unwind the FM wire aerial for FM reception on the rear of the
device and route it so that you achieve optimum reception.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SPLB 44 A1 - IAN 305947 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SPLB 44 A1 - IAN 305947 in the language / languages: French, Portuguese, Spanish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SPLB 44 A1 - IAN 305947

Silvercrest SPLB 44 A1 - IAN 305947 User Manual - German, Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info