679053

Silvercrest SOR 1500 A1 - IAN 115164 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
6
SOR 1500 A1
GB
IE
Assembly
Use the fold-out page of these instructions to assist
you with assembly.
1) Remove the oil radiator and all components from
the box and remove all packaging materials.
2) Place the oil radiator, with the base uppermost,
on a soft surface, for example a carpet.
3) Place the mounting bracket 6 under the
heater element so that the threaded parts
project upwards.
4) Lay a roller rail 7 over it, such that the screw
threads protrude through the holes. Check to
ensure that the recesses on the roller rails 7
are facing outwards. The screw ends project-
ing from the appliance must reach into the
recesses.
5) Screw one wing nut 8 hand tight onto each of
the threaded ends of the mounting bracket 6.
6) Lay the second roller rail 7 over the two
threaded rods that protrude from the control
panel so that they project through the holes in
the roller rail 7. Ensure that the small recesses
on the side of the roller rail 7 face inwards.
The screw ends that project from the appliance
must grip into the recesses.
7) Attach the roller rail 7 by screwing one wing
nut 8 onto each of the threaded rods.
8) Turn the appliance over and place it on the rollers.
Initial operation
1) Unwind all of the power cable from the power
cable retainer 5.
NOTE
►
Ensure that the thermostat 2 and the heat
level switch 3 are standing at MIN resp. 0.
2) Insert the plug into a mains power socket.
3) Set the heat level switch 3 to "3" and the
thermostat 2 to MAX. The "Power" control
lamp 1 illuminates.
NOTE
►
You can use the heat level switch 3 to regu-
late how quickly the appliance warms up.
If you wish to heat it up particularly quickly,
select heat level "3", if a slow warming up is
preferred, select heat level "1".
Using the thermostat 2 you can set it to the
desired temperature.
4) When the desired room temperature has been
reached, slowly turn the thermostat 2 back
down until a quiet "click" is heard and the
"Power" control lamp 1 goes out. The current
room temperature will now be retained. The
"Power" control lamp 1 will light up occasion-
ally then switch back off after a short while.
This merely means that the programmed room
temperature has fallen below this level for a
short period and the appliance has warmed
itself back up.
5) If you want to switch off the appliance, turn the
heat level switch 3 to “0” and then the thermo-
stat 2 to MIN.
6) Remove the plug from the mains power socket.
IB_115164_SOR1500A1_LB6.indb 6IB_115164_SOR1500A1_LB6.indb 6 14.07.15 10:4614.07.15 10:46
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SOR 1500 A1 - IAN 115164 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SOR 1500 A1 - IAN 115164 in the language / languages: English, German as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info