Manual Silvercrest SON 90 A1 - IAN 64780 (page 22 of 38) (English)

614544

Zoom out

Zoom in

1/38

- 20 -

Binding-off and sample sewing

• Lay all yarns under the sewing foot a, to the rear, slightly to the left

and over the stitch plate e.

• Firmly hold the yarns under a slight tension.

• Turn the handwheel 6 2 to 3 revolutions onto itself to begin empty

chainstitch formation.

• Lower the sewing foot a with the sewing foot lever 4.

• Hold the empty chainstitch again firmly and carefully activate the foot

pedal until the empty chainstatch is approximately 5 - 7.5 cm long.

• Place the fabric from the front under the sewing foot a and sew a test

seam (Fig. 51). Under no circumstances should you pull on the textile,

otherwise the needle will be bent or could even break off.

• Continue sewing even after the textile is finished for about 15 to 20 cm.

• Cut the empty chainstitch by using the blade at the rear of the machine

(Fig. 52).

Recommended tension settings

Note:

All information about tension settings for the different kinds of stitches are

purely guiding values. The thread tension itself is always dependant

on the type and thickness of the fabric, as well as needle strength and

the strength, type and material composition of the yarn.

It is therefore absolutely necessary to sew a test seam. It is the only way

you can find out if the tension settings are correct, or if they need to be

changed.

Fig. 51

Fig. 52

IB_64780_SON 90 A1_LB6 08.03.2011 17:22 Uhr Seite 20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SON 90 A1 - IAN 64780 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SON 90 A1 - IAN 64780

Silvercrest SON 90 A1 - IAN 64780 User Manual - German, Dutch, French, Italian - 146 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SON 90 A1 - IAN 64780 Manual

Product: