Manual Silvercrest SNMD 33 A1 - IAN 114195 (page 84 of 94) (English, German, Dutch, French)

614543

Zoom out

Zoom in

1/94

GB / IE

Blind stitch foot

For hems, curtains, trousers, skirts, etc.

Blind stitch for elastic fabrics.

1. Fold the fabric as illustrated with the

left side uppermost.

2. Place the reversed fabric under the

presser foot. Turn the handwheel (21)

forwards by hand until the needle is

fully to the left. It should just pierce the

fold of the fabric. If it does not, adjust

the stitch width accordingly.

3/4.Adjust the guide (3) by turning the dial

(4) so that the guide just rests against

the fold.

Sew slowly and guide the fabric carefully

so that its position does not change in

relation to the guide.

Stitch Stitch width Stitch length

D1~23~4

Button sewing foot

Install the embroidery and darning plate

(o).

Position the work under the foot. Place

the button on the marked position, lower

the presser foot, adjust stitch width to "0"

and first sew a few securing stitches in

the left hole. Adjust the stitch width

(usually between 3 and 4). Sew some

check stitches with the handwheel (21)

until the needle goes cleanly into the right

hole of the button (vary the stitch width

depending on the button) and sew on the

button. Adjust the stitch width to "0" and

sew a few securing stitches.

If a shank is required, place a darning

needle on top of the button and sew. For

buttons with 4 holes, sew through the

front two holes first, push the work

forward and then sew through the back

two holes as described.

Stitch Stitch width Stitch length

B0~50

Sewing basics

HI I have Silvercrest 114195 this machine. How do I lower the feed dog or teeth? Or do I have to buy a plate cover so that I can do free hand embroidery sewing. Any reply is appreciated! Submitted on 3-11-2021 at 14:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 114195 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 114195 Manual

Product: