597358

Silvercrest SNMD 33 A1 - IAN 100138 Manual

24
Zoom out
Zoom in
Previous page
1/50
Next page
Always remove the power plug from the socket
when not using the sewing machine. Use the
dust cover (q) provided. Store the sewing
machine in a dry location which children cannot
access. If the sewing machine is not used for an
extended period, it should be protected from
excessive dust, dirt or moisture.
24
GB / MT
Important:
Removing the stitch plate (A):
Cleaning the feed dog (B):
Cleaning and lubricating the catch (C-G):
Important:
Disconnect the machine from the electricity
supply by removing the plug from the mains
socket. When cleaning the machine, it must
always be disconnected from the electricity
supply.
Turn the handwheel (21) until the needle is fully
raised. Open the hinged front cover and remove
the stitch plate screws with the L-screwdriver (k).
Remove the bobbin case and use the brush (n)
supplied to clean the whole area.
Remove the bobbin case. Snap the two catch
retaining arms (C) outwards. Remove the shuttle
race cover (D) and the catch (E) and clean with a
soft cloth. Lubricate at the points indicated (F) (1-
2 drops) using sewing machine oil. Turn the
handwheel until the shuttle race (G) is in the left
position. Replace the catch (E). Replace the
shuttle race cover and snap back the two catch
retaining arms. Insert the bobbin case and
bobbin and replace the stitch plate.
Fabric fluff and threads must be removed
regularly.
Maintenance
Maintenance
A
B
G
C
F
E
D
Storage
… 24 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-snmd-33-a1---ian-100138

Reset search

  • The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNMD 33 A1 - IAN 100138 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info