Manual Silvercrest SNMD 33 A1 - IAN 100138 (page 23 of 50) (English, German)

597358

Zoom out

Zoom in

1/50

Stitch Stitch width Stitch length

I 3~5 0.3~0.5

GB/MT

Please note:

Set the stitch width before starting to

sew. Carefully turn the hand wheel (21)

to check that the twin needle enters the

stitch hole without touching or even

striking the stitch plate (10) or pressure

foot.

When sewing with a twin needle (j)

always advance and sew slowly to

ensure quality stitching.

When sewing with a twin needle both

threads must be of the same weight.

You can use one or two colours.

1. Place one felt cushion (h) and one

spool (m) on the left spool pin (15) as

usual.

2. Place another felt cushion (h) and

another spool (m) on the right thread

spool pin (15).

3. Insert the twin needle (j).

4. Thread both threads as usual.

5. As the last step, thread one thread

through the left needle and the other

through the right needle.

Stitch Stitch width Stitch length

A2.51~4

Scallop stitching

You can produce a decorative edge with

the scallop stitch

1. Sew the scallop stitch along the edge

of the material.

2. If desired, trim around the scallop with

scissors to create a scalloped edge.

Be careful not to cut the thread.

Sewing basics

Twin needle

The cotton coming from the spool,after 2 stitches bunches up and machine stops.The handwheel is also very tight.I am new to sewing but think I have everything threaded up correctly.Thankyou Fran Submitted on 21-1-2022 at 12:47
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNMD 33 A1 - IAN 100138 in the language / languages: English, German as an attachment in your email.

The manual is 2,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNMD 33 A1 - IAN 100138 Manual

Product: