641023
95
Zoom out
Zoom in
Previous page
1/98
Next page
Problem Cause Correction
Upper thread
breaks
Lower thread
breaks
Skipped
stitches
Needle breaks
Loose stitches
Seams gather
or pucker
Uneven stitches,
uneven feed
The machine is
noisy
The machine
jams
1.The machine is not threaded
correctly.
2.The thread tension is too tight.
3.The thread is too thick for the needle.
4.The needle is not inserted correctly.
5.The thread has become wound
around the bobbin winder spindle (13).
6.The needle is damaged.
1.The bobbin case is not inserted
correctly.
2.The bobbin case is threaded wrongly.
1.The needle is not inserted correctly.
2.The needle is damaged.
3.The wrong size needle has been
used.
4.The wrong presser foot is installed.
1.The needle is damaged.
2.The needle is not correctly inserted.
3.Fabric too thick/ needle size wrong.
4.The wrong presser foot is attached.
1.The machine is not correctly
threaded.
2.The bobbin case is not correctly
threaded.
3.Needle/ fabric/ thread combination is
wrong.
4.Thread tension wrong.
1.The needle is too thick for the fabric.
2.The stitch length is wrongly adjusted.
1.The thread is too weak.
2.The bobbin case is wrongly threaded
3.Fabric has been pulled when sewing.
1.The machine must be lubricated.
2.Fluff or oil have collected on the hook
or needle bar.
3.Poor quality oil has been used.
4.The needle is damaged.
Thread is caught in the hook.
1.Rethread the machine.
2. Reduce the thread tension (3). (lower number)
3.Use a larger needle.
4.Remove and reinsert the needle. (flat side
towards the back)
5.Remove the bobbin (g) and unwind the
thread.
6.Replace the needle.
1.Remove and reinsert the bobbin case and pull
on the thread. The thread should pull easily.
2.Check both bobbin (g) and bobbin case.
1.Remove and reinsert needle. (flat side
towards the back)
2.Replace the needle.
3.Choose a needle size to suit the thread and
fabric.
4.Use the correct presser foot.
1.Replace the needle.
2.Insert the needle correctly (flat side towards
the back)
3.Choose a needle size to suit the thread and
fabric.
4.Use the correct presser foot.
1.Thread the machine correctly.
2.Thread the bobbin case as illustrated.
3.The needle size must suit the fabric and
thread.
4.Correct the thread tension.
1.Use a finer needle.
2.Check the thread tension.
1.Use stronger thread.
2. Rethread the bobbin case and insert correctly.
3.Do not pull on the fabric. It must be
automatically moved by the machine.
1.Lubricate as described.
2.Clean the hook and feed dog as described.
3.Only use good quality sewing machine oil.
4.Replace the needle.
Remove the upper thread and bobbin case,
turn the handwheel (20) backwards and
forwards by hand and remove the thread
remains. Lubricate as described.
3.Fabric puckers. 3.Use a backing for fine or stretchy fabrics.
GB / IE 95
Trouble shooting guide
Maintenance
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNM 33B1 - IAN 274368 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33B1 - IAN 274368 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info