Manual Silvercrest SNM 33 B1 (page 88 of 94) (Dutch, French)

555893

Zoom out

Zoom in

1/94

GB / IE

Monogramming and embroidering with embroidery hoop*

Stitch Stitch width Stitch length

B1~50

Stitch Stitch width Stitch length

B 3~5 0.5~1

Applique

* Embroidery hoop not included with machine.

1. Cut out the applique design and baste it

to the fabric.

2. Sew slowly around the edge of the

design.

3. Trim excess material outside the

stitching. Make sure not to cut any

stitches.

4. Remove the basting thread.

5. Tie top and bottom thread under the

applique to avoid unraveling.

Sewing basics

Attach the embroidery and darning plate

Preparation for Monogramming and

Embroidering*

1. Remove the presser foot and the presser

foot holder.

2. Attach the embroidery and darning plate.

3. Lower presser foot lever before starting

to sew.

4. Adjust the stitch width according to the

size of lettering or design.

1. Draw the desired lettering or design on

the right side of the fabric.

2. Stretch the fabric between embroidery

hoop as firmly as possible.

3. Place the fabric under the needle. Make

sure the presser foot bar is down in its

lowest position.

4. Turn the hand wheel towards you to

bring up the lower thread through the

fabric. Sew a few securing stitches at the

starting point.

5. Hold the hoop with thumb and

forefingers of both hands.

6. Coordinate sewing speed and movement

of hoop.

Maschine läuft, der Stoff wird aber nicht transportiert Submitted on 11-8-2020 at 13:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 in the language / languages: Dutch, French as an attachment in your email.

The manual is 6,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SNM 33 B1

Silvercrest SNM 33 B1 User Manual - English, German - 50 pages

Silvercrest SNM 33 B1 User Manual - Italian, Portuguese, Spanish - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 Manual

Product: