Manual Silvercrest SNM 33 B1 (page 19 of 50) (English, German)

555893

Zoom out

Zoom in

1/50

Preparation:

Note:

To prepare the fabric:

Tips:

Remove the zigzag foot and attach the buttonhole

foot. Adjust the stitch length dial between "0.3" - "1".

The density of the stitch depends on thickness of

the fabric.

Always test sew a buttonhole.

Measure the diameter of the button and add 0.3cm

(1/8") for the bartacks. If you have a very thick

button, add more to the diameter measurement.

Mark the position and length of the buttonhole on

the fabric. Raise the needle to its highest position.

Position the fabric so that the needle is on the mark

that is furthest from you.

Pull the buttonhole foot towards you as far as it will

go.

Lower the foot.

A. Turn the pattern selector dial to " ". Sew at

moderate speed until you reach the end mark.

Raise the needle to its highest position.

B. Turn the pattern selector dial to " " and sew 5-

6 bartack stitches. Raise the needle to its highest

position.

C. Turn the pattern selector dial to " " and sew

the left side of the buttonhole to the mark at the

end which is further from you. Raise the needle

to its highest position.

D. Turn the pattern selector dial to " " and sew

bar tack stitches. Raise the needle to its highest

position.

Bringing up the foot. Remove the fabric from under

the foot. Draw the upper thread through the

backside of the fabric and knot upper and lower

threads. Cut the center of the buttonhole with the

stitch ripper, being careful not to cut the stitches on

either side.

- Slightly reduce upper thread tension to produce

better results.

- Use backing material for fine and stretchy fabrics.

- It is advisable to use a gimp cord for stretch or

knit fabrics. The zigzag should sew over the gimp.

(E)

GB / IE 19

Buttonhole foot

Stitch Stitch width Stitch length

50.3~1

Sewing basics

AB CD

Stitch length

0.3

Maschine läuft, der Stoff wird aber nicht transportiert Submitted on 11-8-2020 at 13:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 in the language / languages: English, German as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SNM 33 B1

Silvercrest SNM 33 B1 User Manual - Dutch, French - 94 pages

Silvercrest SNM 33 B1 User Manual - Italian, Portuguese, Spanish - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 Manual

Product: