555893

Silvercrest SNM 33 B1 Manual

15
Zoom out
Zoom in
Previous page
1/50
Next page
GB / IE 15
NEEDLE SIZE
9-11(65-75)
12(80)
14(90)
16(100)
18(110)
Lightweight fabrics-thin cottons, voile, serge, silk ,
muslin, Qiana, interlocks, cotton knits, tricot,
jerseys, crepes, woven polyester, shirt & blouse
fabrics.
Medium weight fabrics-cotton, satin, kettleclote,
sailcloth, double knits, lightweight woollens.
Medium weight fabrics-cotton duck, woolen,
heavier knits, terrycloth, denims.
Heavyweight fabrics-canvas, woolens, outdoor
tent and quilted fabrics, denims, upholstery
material (light to medium).
Heavy woollens, overcoat fabrics, upholstery
fabrics, some leathers and vinyls.
Light-duty thread in cotton,
nylon or polyester.
Most threads sold are medium
size and suitable for these
fabrics and needle sizes. Use
polyester threads on synthetic
materials and cotton on natural
woven fabrics for best results.
Always use the same thread on
top and bottom.
Heavy duty thread, carpet
thread. (Use heavy foot
pressure-large numbers.)
FABRICS THREAD
Sewing / Useful applications
Matching needle/ fabric/ thread
Note twin needle:
1. Twin needles, can be purchased for utility and decorative work.
2. When sewing with twin needles, the stitch width dial should be set at less than "3" and set the needle
position dial to middle position.
3. European needles show sizes 65, 70, 80 etc. American and Japanese needles show size 9, 11, 12 etc.
4. Replace needle often (approximately every other garment) and / or at first thread breakage or skipped
stitches.
NEEDLE, FABRIC, THREAD SELECTION GUIDE
IMPORTANT: Match needle size to thread size and weight of .fabric
Sewing basics
A
1
C
B
3
2
Sewing (1)
Once the sewing machine is correctly
adjusted and installed, lower the presser
foot by lowering the lever. Press the
controller pedal to start sewing.
Stitching (2)
Releasing the material (3)
Cutting the thread (3)
At the end of seam, press down the reverse
sewing lever (A). Sew a few reverse
stitches. Release the lever and the machine
will sew forwards again.
Turn the hand wheel counterclockwise and
put the thread lever (C) into its highest
position. Start the sewing foot and pull the
material back in order to release it.
Hold the threads behind the presser foot
with both hands, guide them to the slit (B)
and press down.
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-snm-33-b1

Reset search

  • Maschine läuft, der Stoff wird aber nicht transportiert Submitted on 11-8-2020 at 13:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SNM 33 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 in the language / languages: English, German as an attachment in your email.

The manual is 5,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SNM 33 B1

Silvercrest SNM 33 B1 User Manual - Dutch, French - 94 pages

Silvercrest SNM 33 B1 User Manual - Italian, Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info