Manual Silvercrest SNM 33 B1 - IAN 89602 (page 84 of 94) (French)

597354

Zoom out

Zoom in

1/94

GB / IE

Sewing basics

For hems, curtains, trousers, skirts, etc.

Blind hem/ lingerie for firm fabrics.

1. Fold the fabric as illustrated with the

wrong side uppermost.

2. Place the fabric under the foot. Turn the

handwheel forwards by hand until the

needle swings fully to the left. It should

just pierce the fold of the fabric. If it does

not, adjust the stitch width accordingly.

3/4.Adjust the guide (3) by turning the knob

(4) so that the guide just rests against

the fold.

Sew slowly, by pressing the foot control

lightly guiding the fabric along the edge of

the guide.

Stitch Stitch width Stitch length

D1~23~4

Stitch Stitch width Stitch length

B0~50

Blind stitch foot

Button sewing foot

Install the embroidery and darning plate.

This will cover the feed dog and the stitch

length will be disabled.

according to the button

Position the work under the foot. Place the

button on the marked position, lower the

foot, adjust stitch width to "0" and sew a few

securing stitches. Adjust the stitch width

. Turn the

handwheel to check that the needle goes

cleanly into the left or right hole of the

button, and sew on the button. Adjust the

stitch width to "0" and sew a few securing

stitches.

If a shank is required, place a darning

needle on top of the button and sew. For

buttons with 4 holes, sew through the front

two holes first, push work forward and then

sew through the back two holes as

described.

tension seems to alter after sewing about 6", new, needle ,thread, bobbin and checking threading. still happens Submitted on 4-8-2020 at 15:21
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 - IAN 89602 in the language / languages: French as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SNM 33 B1 - IAN 89602

Silvercrest SNM 33 B1 - IAN 89602 User Manual - English, German, Dutch - 72 pages

Silvercrest SNM 33 B1 - IAN 89602 User Manual - Italian, Portuguese, Spanish - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 - IAN 89602 Manual

Product: