Manual Silvercrest SNM 33 B1 - IAN 89602 (page 78 of 94) (French)

597354

Zoom out

Zoom in

1/94

GB / IE

Getting ready

Place the spool (m) on the spool pin and

hold it in place with the spool pin cap (r).

- Small spool pin cap for thin threads

- Big spool pin cap for thick threads

Lead the thread from the spool into the

thread guide, and up to the .

Pull the thread from the inside through a

hole of the empty spool (g). Place the spool

on the spool holder and push to the right

into the filling position.

Hold the end of the thread. Press the pedal.

Release the pedal after a few turns.

Release the thread and cut as close as

possible to the spool. Press the pedal again.

Once the spool is full, it rotates slowly.

Release the pedal. Replace the spool into

sewing position and remove it.

If the bobbin winder spindle is in winding

position, the sewing process is

automatically interrupted. To sew push

the bobbin winder spindle to the left

(sewing position).

bobbin

Note:

Inserting the bobbin

Attention:

Note :

Turn power switch to off ("O").

When inserting or removing the bobbin, the

needle must be fully raised.

1. Open the hinged cover.

2. Pull the bobbin case tab (A) and remove

the bobbin case.

3. Hold the bobbin case with one hand.

4. Insert the bobbin (3) so that the thread

runs in a clockwise direction (arrow). (4)

5. Put the thread under the tension spring.

6. Hold the bobbin case by the hinged latch.

7. Insert it into the shuttle.

The method to bringing up the lower

thread is explained on page 80.

Winding the bobbin

tension seems to alter after sewing about 6", new, needle ,thread, bobbin and checking threading. still happens Submitted on 4-8-2020 at 15:21
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SNM 33 B1 - IAN 89602 in the language / languages: French as an attachment in your email.

The manual is 2,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SNM 33 B1 - IAN 89602

Silvercrest SNM 33 B1 - IAN 89602 User Manual - English, German, Dutch - 72 pages

Silvercrest SNM 33 B1 - IAN 89602 User Manual - Italian, Portuguese, Spanish - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SNM 33 B1 - IAN 89602 Manual

Product: