Manual Silvercrest SND 3600 D3 - IAN 307324 (page 15 of 131) (English, German, Dutch, Danish, French)

679064

Zoom out

Zoom in

1/131

SND 3600 D3

│

11 ■

Inserting slides

♦ Insert slides the right way round into the shaft provided on the

slide magazine 6. Around 10–12 slides (depending on size)

can be added to the magazine.

♦ Push the slide magazine

6 into the slot 4 on the right with the

viewing window at the front. Ensure that the triangle marking is

at the front and visible (see ﬁgure 2).

Use the pusher on the side of the slide magazine

6 to push the

slides in the shaft individually into the scanner.

♦ To do this, ﬁrst slide the pusher away from the scanner as far

as the stop. Afterwards, move the pusher carefully towards the

scanner.

NOTE

► This pushes any slide that is in the scanner out of the device

and a new slide is pushed into the viewing range of the

scanner.

► Make sure that you push the new slide into the scanner

slowly. If you push too quickly, the slide could slip past the

viewing range of the scanner.

♦ When you have ﬁnished scanning slides, remove the slide maga-

zine

6 from the slot 4.

Remove the last slide from below from out of the slide magazine

viewing window 6.

i am having difficulty loading my silvercrest snd 3600 d3 software from the disc supplies.
when i follow all the software instructions my scanner does not work . can you help with this Submitted on 15-11-2020 at 12:52
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SND 3600 D3 - IAN 307324 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SND 3600 D3 - IAN 307324 Manual

Product: