Manual Silvercrest SMZS 1600 A1 - IAN 66492 (page 18 of 24) (English)

663577

Zoom out

Zoom in

1/24

5 Troubleshooting

Before contacting your authorised Royal Appliance dealer, Royal Appliance service partner or appli-

ance market, first follow the procedure in the following table to check if you can handle the problem

yourself.

WARNING:

Danger of injury! Never use a defective appliance! Always switch off the appliance and disconnect

it from the mains before starting troubleshooting ZChapter 3.3, "Switching off and retracting

power cord".

Problem Possible cause Solution

The appliance will

not start

The socket does not carry

current.

Test the vacuum cleaner at another socket which

you are sure carries current.

Power cord is damaged. Have the cord replaced by

SILVERCREST Cus-

tomer Service, address Zpage 20, "Warranty".

Appliance sud-

denly stops vacu-

uming and

switches itself off

The overheating protection

has tripped, possibly due to

blocked suction channels, fil-

ters, or similar.

Switch the appliance off and pull the plug out of

the socket. Eliminate the cause of overheating

(e.g. blocked suction channels, filters, etc.). Wait

for about 45 minutes. After the appliance has

cooled off, you may switch it on again.

Red indicator light

(Fig. 1/15) lights

The dust container (Fig. 1/

11) is full.

Empty / clean the dust container ZChapter 4.1,

"Emptying the dust container".

Nozzle, telescopic tube, tube

extension or suction hose are

blocked.

Remove the obstacle. If necessary, use a long

wooden stick (e.g. a broomstick) to do this.

The filter is dirty. Clean the respective filter ZChapter 4.4, "Clean-

ing the hygienic exhaust filter" or ZChapter 4.5,

"Cleaning the dual motor protection filter".

The results are

unsatisfactory in

spite of the appli-

ance working cor-

rectly

The bypass vent (Fig. 1/4) is

open.

Close the bypass vent (Fig. 1/4).

The nozzle you are using

does not suit the flooring.

Select the right brush/nozzle for the type of floor

ZChapter 2.3, "Using further nozzles (accesso-

ries)".

The "carpet/hard floor" selec-

tor (Fig. 1/13) is in the wrong

position for the particular

type of floor.

Set the "carpet/hard floor" selector (Fig. 1/13) to

the correct position for the type of floor,

ZChapter 3.1, "Vacuum cleaning", step 5.

NOTE:

If you cannot solve the problem following these instructions, contact the Royal Appliance cus-

tomer service Zpage 22, "International Service".

66492_Silvercrest_Multicyclone-Bodenstaubsauger_SMZS_1600_A1__GB.pdf 17 20.05.2011 07:53:36

How can I buy the telescope tub stop catch. Or the telescope. What is the price and do you deliver to Cyprus. Submitted on 16-6-2020 at 18:06
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMZS 1600 A1 - IAN 66492 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SMZS 1600 A1 - IAN 66492

Silvercrest SMZS 1600 A1 - IAN 66492 User Manual - German, Dutch, French, Italian - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SMZS 1600 A1 - IAN 66492 Manual

Product: