739742

Silvercrest SMZCD 400 A1 IAN 72030 Manual

33
Zoom out
Zoom in
Previous page
1/37
Next page
31
SMZCD 400 A1
GB
5) Ensure that the sealing ring 4 is inserted into the lid 3: the two rubber lips on
the sealing ring 4 must engage in the plastic rail in the interior of the lid 3.
6) Then close the bowl 7 with the lid 3: Place it on the bowl 7 so that the
lugs on the lid 3 engage in the slots on the bowl 7. Then turn the lid 3
so that the lugs slide unter the slots and the lid 3 locks into place.
7) Place the motor unit 2 on the lid 3.
8) Press the motor unit 2 down to start the motor at normal operating speed.
9) To obtain the higher processing speed "Turbo“ for the contents, in addition to
the motor unit 2 press and hold down the turbo button 1. As soon as you
release the turbo button 1 the appliance returns to the normal operating
speed.
NOTICE
►
Should larger pieces of the contents collect on the wall of the bowl while
processing, lift the motor unit 2 from the lid 3. Shake the bowl 7 vigorously
and then continue with the processing. Remove possible residues with a
dough scraper.
► Before starting the processing, particularly hard foods must be cut into
smaller pieces (about 2cm). Otherwise, the motor will block. Select a
pulsating processing for hard foodstuff s. For this, press the turbo button
1 repeatedly for a short time (in addition to the motor block 2). Should
the foodstuff not be completely chopped, you can either cut it into smaller
pieces or lift the motor unit 2 from the lid 3. Shake the bowl 7 vigor-
ously and then continue with the processing.
10) When the contents have been suffi ciently chopped, release the motor unit 2
and, if necessary, the turbo button 1.
11) Remove the power plug from the mains power socket.
WARNING - RISK OF INJURY!
► Never attempt to remove foodstuff s from the bowl 7 as long as the
blade 6 is still rotating. Contents could shoot out and make a mess.
12) Wait until the blade 6 has stopped rotating.
13) Lift the motor unit 2 from the lid 3 and remove it.
WARNING - RISK OF INJURY!
► To prevent injuries, exercise caution when handling the extremely sharp
blade 6. Keep the blade 6 out of the reach of children.
IB_72030_SMZCD400A1_LB2.indb Abs2:31IB_72030_SMZCD400A1_LB2.indb Abs2:31 10.04.12 14:4010.04.12 14:40
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMZCD 400 A1 IAN 72030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMZCD 400 A1 IAN 72030 in the language / languages: French as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SMZCD 400 A1 IAN 72030

Silvercrest SMZCD 400 A1 IAN 72030 User Manual - English, German, Dutch - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info