576718

Silvercrest SMZ 260 F1 - IAN 97737 Manual

42
Zoom out
Zoom in
Previous page
1/44
Next page
- 39 -
➩ Pour the cream in.
➩ Close the bowl 6 with the lid 4: Place it on the
bowl 6 so that the lugs on the lid 4 engage in
the slots on the bowl 6. Turn the lid 4 so that
the lugs slide into the guides below.
➩ Place the motor block 2 on the lid collar 3.
➩ Press the motor block 2 downwards , as shown
in Figure B. The motor starts with the normal ope-
rating speed.
Note
To whip cream optimally, it should be well chilled
before being whipped (max 8°C / refrigerator tem-
perature). For 100ml of cream we recommend a
whipping time of 30 seconds at normal speed.
For 200 ml of cream we recommend a whipping
time of 30 - 50 seconds at normal speed.
Due to various factors, for example the fat content
of the cream or the outdoor temperature, the whip-
ping time can however vary! Observe the cream
whilst whipping it and adjust the processing time to
your requirements.
Cleaning
Risk of electric shock!
Always remove the plug from the mains power sok-
ket before cleaning the appliance. Under no circum-
stances may the appliance be immersed in water or
held under running water during cleaning.
Risk of personal injury!
To avoid injuries, exercise caution when handling the
extremely sharp blade 7. Reassemble the universal
food processor after using and cleaning it so that you
do not injure yourself on the exposed blade 7. Keep
the blade 7 out of the reach of children.
Attention!
Do not clean the motor block 2 in the dish-washer
as doing so would damage it.
➩ Unplug the power cable from the socket.
➩ Clean the motor block 2 and the blade holder 5
with the blade 7 by using a well pressed-out
sponge.
➩ Clean the bowl 6, the whisk attachment 0, the
lid 4 and the appliance base 9 under running
water and use a tea-towel to dry them well.
➩ Alternatively, you can wash all components,
EXCEPT the motor block 2, in the dish-washer.
If possible, place the parts in the top basket of
the dishwasher. Ensure that the parts are not
trapped in any way..
Troubleshooting
Symptom:
The appliance will not switch on.
Possible cause and remedy:
• A domestic electrical fuse is defect.
Check the fuses and replace them if necessary.
• The power socket is defective. Try another power
socket.
• The universal food processor is possibly defective.
Check the power cable and the power plug for
damages. Have the appliance checked by a
qualified technician.
IB_97737_SMZ260F1_LB1 14.02.2014 13:34 Uhr Seite 39
… 42


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-smz-260-f1---ian-97737

Reset search

  • mini chopper SMZ260F1: motor runs but chopper attachment does not. Seems like clutch drive is slipping. Is there a fix?? Submitted on 6-6-2021 at 13:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMZ 260 F1 - IAN 97737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMZ 260 F1 - IAN 97737 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info