739408

Silvercrest SMZ 260 B1 IAN 69293 Manual

31
Zoom out
Zoom in
Previous page
1/41
Next page
- 29 -
Risk of personal injury!
Never attempt to remove food from the bowl 6
when the blade 7 is still in motion. Contents could
shoot out and make a mess.
Wait until the blade 7 has stopped rotating.
Lift the motor block 2 from the lid collar 3.
Remove the lid 4.
Risk of personal injury!
To avoid injuries, exercise caution when handling
the extremely sharp blade 7. Keep the blade 7
out of the reach of children.
Carefully pull the blade holder 5 with the knife
7 out of the bowl 6.
Remove the contents.
Note
Due to the grinding of hard and abrasive foodstuffs,
the bowl 6 can take on a dull appearance over
time. This is normal and does not influence the
functioning of the appliance.
Tip
After you have finished processing the foodstuffs,
you can use the appliance base
o
as a cover for
the bowl
y
, this will help to keep the foodstuff fresh
for longer.
Remove the motor block 2 and the lid 4 from
the bowl
y
.
The blade retainer 5 with the blade 7 can, if
you wish, remain in the bowl
y
.
Loosen the appliance base
o
from the undersi-
de of the bowl
y
. You can now place applian-
ce base
o
on the bowl
y
so that it seals the
bowl
y
.
Beating cream
Using the whisk attachment 0, you can also whip
cream with this appliance:
Place the bowl 6 in the appliance base 9.
Place the blade holder 5 with the knife 7 on
the mounting 8.
Push the whisk attachment 0 onto the blade hol-
der 5:
For 100ml of cream, place it on the blade holder
so that the whisk attachment 0 rests on the two
blades and engages.
For 200ml of cream, turn the whisk attachment
0 vertically through 180°, so that it rests on
only one blade and engages. It then ploughs
higher through the cream:
Pour the cream in.
Close the bowl 6 with the lid 4: Place it on the
bowl 6 so that the lugs on the lid 4 engage in
the slots on the bowl 6. Then turn the lid 4 so
that the lugs slide unter the slots and the lid 4
locks into place.
Place the motor block 2 on the lid collar 3.
Press the motor block 2 downwards , as shown
in Figure B. The motor starts with the normal ope-
rating speed.
IB_69293_SMZ260B1_LB5 19.07.2011 15:58 Uhr Seite 29
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMZ 260 B1 IAN 69293 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMZ 260 B1 IAN 69293 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SMZ 260 B1 IAN 69293

Silvercrest SMZ 260 B1 IAN 69293 User Manual - German, Dutch, French, Italian - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info