773646
28
Zoom out
Zoom in
Previous page
1/145
Next page
28 GB/IE
Initial use
Remove all packaging materials as well as protective
films and check that all parts are complete and un-
damaged. Never remove the light beige Mica cover
1 in the cooking chamber of the product. This is
not a packaging material - its purpose is to protect
the magnetron. If the product is incomplete or dam-
aged upon delivery, please contact the manufacturer.
Choosing an installation site
Choose a level surface which ensures sufficient
free space for the aeration and ventilation of the
product (see Fig. C).
Make sure that the mains plug is easily accessible
so that it can be easily reached and unplugged
in case of danger.
Install the product as far away from radios and
t
elevisions as possible. Operating the product
can
cause disruptions in radio or television reception.
Preparing the product
Open the door 9 by pulling on the door
handle 8.
Before first use, clean the product‘s cooking
c
hamber with a cloth and some lukewarm wate
r.
Make sure that no residue is left when removing
all protective and adhesive films.
Place the turntable shaft 6 in the hole in the
base of the cooking chamber. Make sure to in-
sert the turntable shaft 6 into the hole as far
as it will go.
Place the turntable ring 5 into the well inside
the cooking chamber.
Do not operate
the product without a properly
inserted glass plate 4.
Place the glass plate 4 on the turntable ring 5
and the turntable shaft 6. In doing so, the three
glass points on the underside of the glass plate
4 must engage in the grooves on the turntable
shaft 6.
Close the door 9 by pushing it shut. Make sure
that the door locking mechanism 7 clicks into
place.
Plug the mains plug into a professionally in-
stalled mains socket. Make sure that the mains
voltage corresponds to that of the product
(see “Technical data“).
Configuring default settings
Setting the time
When the product is operated for the first time or if
the electricity supply is interrupted, the display 2
shows “0:00“ and the time (24-hour display) must
be set.
Press the timer / clock button 11 twice.
The hour display will start to flash.
Turn the rotary control 13 to set the desired hour.
Then press the timer / clock button
11
ag
ain.
Turn the rotary control 13 to set the desired
minutes.
T
hen press the timer / clock button
11
ag
ain.
The time is now set.
Setting the child safety lock
You can activate a child safety lock by pressing
and holding the stop button 14 for approx.
3 seconds. A signal tone sounds and
appears in the display 2. The product‘s buttons
now have no function. After approx. 3 seconds,
the time is displayed again, provided that it has
been set.
You can deactivate the child safety lock by
pressing and holding the stop button 14
again for 3 seconds. A signal tone sounds and
all functions are available again.
Use
Never operate
the product when empty!
Open the door 9 by pulling on the door
handle 8.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMWC 700 B3 - IAN 352742 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMWC 700 B3 - IAN 352742 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info