517559
48
Zoom out
Zoom in
Previous page
1/55
Next page
- 46 -
Heating and cooking
Microwave operation
Notice!
During the cooking process, drops of water can form
on the oven door or on the housing. This is normal and
is not an indication of a malfunction.When the appli-
ance has cooled down, wipe the moisture off with a
dry cloth.
Risk of fire!
Never use the grill stand t or other metallic objects
when you are using the appliance in the microwave
mode. Metals reflect the microwave radiation and it
leads to the generation of sparks. This could cause
a fire and irreparably damage the appliance!
Selecting the operation level
Press the button Operation r the appro-
priate number of times to set the required power
level.
1xfor 800 Watts of power (P800).
2xfor 700 Watts of power (P700).
3xfor 600 Watts of power (P600).
4xfor 500 Watts of power (P500).
5xfor 400 Watts of power (P400).
6xfor 300 Watts of power (P300).
7xfor 200 Watts of power (P200).
8xfor 100 Watts of power (P100).
The power setting level is indicated in the display 1
(e.g. P800 at 800 Watts of power).
Programming the cooking time
After you have selected the power level, programme
in the desired cooking time:
Turn the control dial q, until the desired cooking
time has been programmed in.
The increments for setting the time with the control
dial q are as follows:
from 10 sec. to 5 min: in 10 second increments
from 5 to 10 min: in 30 second increments
from 10 to 30 min: in 1 minute increments
from 30 to 95 min: in 5 minute increments
Aborting/stopping an input process
Press the button Stop 0 once to cancel or end
input of data. The appliance reverts to standby mode.
Starting the cooking process
When you have programmed in the power level
and the cooking time, and the symbol blinks in
the display 1, you can start the cooking process:
To start the cooking process, press button Start/
Quickstart q .In the display 1 appear the sym-
bols for microwave operation and cooking
(Power P100 - P400) or (Power P500 -
P800).
The programmed time starts to count down.
Interrupting the cooking process
Press the button Stop 0 once to interrupt a cooking
process . The appliance interrupts the cooking process
and stops the remaining time. Press the button
Start/Quick start q to continue the cooking pro-
cess.
Abort the cooking process
Press the button Stop 0 twice to stop the cooking
process. The appliance reverts to standby mode.
Cooking process is finished
When a cooking process is complete, "End" appears
in the display 1 and 4 signal tones sound. If the
door of the microwave is not opened, the signal
tones sound again after about 2 minutes.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMW 800 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMW 800 A2 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info