575506

Silvercrest SMK 2500 A1 - IAN 102463 Manual

9
Zoom out
Zoom in
Previous page
1/40
Next page
6
SMK 2500 A1
GB
IE
Setting up
WARNING! RISK OF FIRE!
► Never place the appliance beneath wall cup-
boards or next to curtains, cupboard walls or
other fl ammable objects.
► Always ensure a minimum distance between
the appliance and wall cupboards, ceilings,
walls or similar of at least 30 cm above
the appliance and 12 cm at the sides and
behind. For this reason the appliance may not
be used, for example, in cupboards or similar.
Otherwise there is likely to be insuffi cient ven-
tilation for the appliance, which could cause
a fi re or damage the appliance itself.
► Always place the appliance on a heat-
resistant surface. Failure to do so increases
the risk of fi re or of it being damaged. The
area under the bottom can discolour and be
damaged. Additionally, if placed on a soft
upper surface, the appliance could cause
permanent damage to it due to pressure
indentations.
DANGER – ELECTRIC SHOCK!
►
Do not place the appliance immediately adja-
cent to sources of water, e.g. sinks or basins,
or in damp cellar areas. Otherwise, there is
a risk of receiving an electric shock.
■ Take the appliance and all the accessories out
of the box and remove all packing material.
■ Place the appliance on a solid, level and heat-
resistant surface (e.g. stainless steel worktops
or natural stone worktops such as granite).
Ensure there is suffi cient ventilation around the
appliance.
■ Clean all components as described in the section
"Cleaning and care".
Using the appliance
Glass door
ATTENTION! PROPERTY DAMAGE!
►
Do not lean on the glass door 7. Do not
place any objects on the glass door 7.
This can cause damage to the hinges.
■ If you are cooking especially fatty foodstuff s,
this can result in increased smoke production.
In this case, do not close the glass door 7
completely but leave it slightly open:
The glass door 7 has a latching position so that
it remains open a little: if you carefully push the
glass door 7 closed, it clicks into this position
shortly before closing completely.
Inserting the crumb tray
■ Push the crumb tray 8 under the lower heating
element so that it rests on the bottom of the
appliance.
Using the baking tray/rack
WARNING! RISK OF INJURY!
► Always use the tongs q to insert the hot
baking tray 9/the hot rack 0 into the
appliance or to remove it.
■ Push the baking tray 9/the rack 0 into one
of the rails in the appliance cooking chamber.
ATTENTION! PROPERTY DAMAGE!
►
Never place the baking tray 9/the rack 0
directly onto the heating elements.
IB_102463_SMK2500A1_NL.indb 6IB_102463_SMK2500A1_NL.indb 6 29.07.14 10:2529.07.14 10:25
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMK 2500 A1 - IAN 102463 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMK 2500 A1 - IAN 102463 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info