575477

Silvercrest SMB 70 A1 - IAN 90980 Manual

6
Zoom out
Zoom in
Previous page
1/35
Next page
3
SMB 70 A1
GB
IE
WARNING! RISK OF INJURY!
► This device is not intended for use by persons
(including childr
en) with limited physical,
physiological or intellectual abilities or lack
of experience and/or knowledge unless they
are supervised by a person who is responsi-
ble for their safety, or receive instructions from
this person on how to use the appliance.
► Children should be supervised to ensure that
the
y do not play with the appliance.
► To ensure that you can disconnect the appli-
ance quickly in the e
vent of an emergency,
do not use extension cables.
ATTENTION! DAMAGE TO PROPERTY!
► Do not place vases or other containers fi lled
with liquid on the appliance!
► Ensure that the ventilation slits are not covered
when the appliance is in use. Risk of o
ver-
heating! Maintain a clear distance of at least
15 cm between the ventilation slits and other
objects.
► Do not operate the appliance in rooms with
high humidit
y (bathrooms etc.) or rooms
in which explosives or easily infl ammable
materials or gases are stored. Rooms which
may have poor air circulation, e.g. garages,
are also unsuitable.
► Do not transport the minibar unless it is
empt
y. Remove all bottles before the trans-
portation.
► Do not place the appliance close to open
fl
ames or other sources of heat (heating,
direct sunlight, gas stoves, etc.).
► Never place the appliance in a fi tted cup-
boar
d, recess or the like.
Before fi rst use
Placement of the bottle racks
NOTE
► In order to insert or remove the bottle racks, the
door 7 of the appliance must be opened b
y
90°. This provides maximum room for remov-
ing or inserting the bottle racks q/w.
■ Slide the bottle racks w into the r
ails:
Ensure that the recesses for the bottles point
downwards.
Ensure that the small locking brackets at the
bottle racks w are in the recesses at the rear
end of the rails.
■ Slide the double bottle rack q into the lo
wer rail.
Setting up
ATTENTION! DAMAGE TO PROPERTY!
► Ensure that the ventilation slits and the fan
ar
e not covered when the appliance is in
use. Risk of overheating! Maintain a clear
distance of at least 15 cm between the venti-
lation slits and other objects.
■ Place the appliance on a clean and level
sur
face.
■ If the appliance is slightly unstable, the uneven-
ness of the sur
face upon which it has been
placed can be compensated for using the
adjustable feet 0. To do this, turn the relevant
adjustable feet 0 until the appliance is stable.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SMB 70 A1 - IAN 90980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SMB 70 A1 - IAN 90980 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info