679193

Silvercrest SKV 1200 B2 - IAN 292161 Manual

30
Zoom out
Zoom in
Previous page
1/117
Next page
■ 26│GB
│
IE
SKV 1200 B2
■ Now you can clean all the parts (blender jug C,
blade holder A the blade z and sealing ring B)
in warm water with a little washing up liquid
using a washing up brush. Afterwards, rinse all
the parts with clean water so that no detergent
residues remain.
NOtE
► The blender jug C and the measuring cup e
are dishwasher-safe.
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed. We recommend
using the top rack of the dishwasher and a
washing programme with max. 45°C.
■ After cleaning, reassemble the blender:
– Push the sealing ring B back into the recess
on the blade holder A with the blade z.
– Place the blade holder A with the blade z
back into the blender jug C so that the
blade z protrudes into the blender jug C.
Note the corresponding slots on the blender
jug C.
– Turn the blade holder A clockwise as far
as possible so that the blade holder A sits
firmly on the blender jug C again.
– Press the blender lid r
with the measuring
cup e slightly offset firmly back onto the
blender t. Close the blender lid r by
turning it clockwise as far as the stop
back
into the catch
on the blender t. Ensure
that the pouring spout on the blender t
is
closed.
In most cases, you can achieve sufficiently hygienic
cleaning of the blender t immediately after use in
the following way:
1) Put some water containing a little detergent
into the fully assembled blender t.
2) Press the blender lid r
with the measuring cup e
slightly offset firmly onto the blender t.
Close the blender lid r by turning it clockwise
as far as the stop
back into the catch
on the
blender t. Ensure that the pouring spout on
the blender t
is closed.
3) Switch on the blender t for a few seconds.
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Then rinse out the blender t with plenty of
clean water so that all detergent residues are
removed.
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry location.
Troubleshooting
If the appliance suddenly stops working:
■ The appliance has overheated and triggered the
automatic safety cut-out.
– Turn the rotary switch 3 to 0.
– Remove the plug from the wall socket.
– Allow the appliance to cool for 15 minutes.
– If the appliance has not yet cooled off com-
pletely after 15 minutes, it will not start.
– Wait a further 15 minutes and try switching
on again.
If the appliance cannot be switched on:
– Check that the plug is correctly connected
to a wall socket.
– Check whether the swivel arm 1 is in the
wcorrect position.
IB_292161_SKV1200B2_LB8.indb 26 22.09.17 07:53
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skv-1200-b2---ian-292161

Reset search

  • Dobrý den, chcem dokupit prislušenstvo k kuchynskemu robotu IAN 292161 Jedná sa o mlyncek na mäso a dalšie mlyncek na rezance. Dakujem Peter Zelinka Slovakia. Submitted on 3-11-2020 at 22:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKV 1200 B2 - IAN 292161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKV 1200 B2 - IAN 292161 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info