575411
51
Zoom out
Zoom in
Previous page
1/58
Next page
SKT 2000 A1 49
5. Unpacking and setting up
5.1 Mounting the appliance
Before the appliance can be used, the feet 4
must be screwed on as follows:
1. Unpack the appliance from the
packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs
of damage.
4. Screw the feet 4 to the underside of the
convector using the screws provided. 2
screws are inserted diagonally per foot.
5.2 Setting up the appliance
Note: As the appliance and heating
elements are supplied with a thin film of
grease, there might be a small amount of
smoke and odour the first time the appliance
is used. This is not harmful and will stop after
a short while. Please ensure meanwhile that
there is sufficient ventilation.
Warning! Ensure that there is
sufficient distance from the wall,
fixtures and other appliances. The
distance must be at least 0.5 m to
exclude the risk of fire.
1. Select a location in compliance with the
safety information (see “4. Safety
instructions” on page 46).
2. Plug the mains plug into a wall socket
that complies with the technical data.
Note: If you have plugged other power
consumers into the same circuit, check
that the maximum load for the installed
fuse is not exceeded, as otherwise the
fuse will trip.
6. Operation
6.1 Using the appliance for the first time
and switching off
1. Insert the mains plug into a mains socket
that complies with the technical data
(see “3. Technical data” on page 46).
2. Set the main
switch 11 to "I" to
switch on the power
supply.
The appliance is now ready to use.
3. Set the main
switch 11 to "0" to
switch off the power
supply.
6.2 Setting the
heating setting
The heating settings are used to select how
quickly the appliance heats up.
The appliance has three heating settings:
Level 1: 750 watts: Press switch 6;
Level 2: 1250 watts: Press switch 5;
– Level 3: 2000 watts: Press switches 5
and 6.
1
2
4
2
3
22
2
1
2
0
1
9
18
8
7
6
5
4
3
2
0
I
1
2
4
2
3
22
2
1
2
0
1
9
1
8
8
7
6
5
4
3
2
0
I
RP77967 Konvektor-Timer LB1 Seite 49 Freitag, 20. Juli 2012 7:30 19
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKT 2000 A1 - IAN 77967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKT 2000 A1 - IAN 77967 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info