Manual Silvercrest SKRP 1000 A1 IAN 58821 (page 42 of 62) (English, Portuguese, Spanish)

737618

Zoom out

Zoom in

1/62

- 40 -

present) must be removed and then re-

inserted.

Information regarding the

handling of batteries

The appliance uses a battery for memo-

ry conservation. For the handling of bat-

teries please observe the following:

Riskofexplosion!

• Never subject batteries to excessive heat,

such as direct sunlight, re, etc. Do not

recharge the batteries.

• Never open batteries, never solder or

weld batteries. The risk of explosions

and injuries exists!

• Non-observance of the correct polarities

when inserting the battery may cause

an explosion. The battery may only be

replaced by one of the same or an

equivalent type.

• Regularly check the condition of the bat-

teries. Leaking batteries can cause dam-

age to the appliance.

• If you do not intend to use the appliance

for an extended period, remove the bat-

teries.

• Should the batteries leak, put on a pair

of protective gloves and clean the battery

compartment and terminals with a dry

cloth.

 Important!

No liability/warranty will be consid-

ered for damage to the Kitchen Radio

caused by the eects of moisture, water

penetration or overheating!

The appliance components

q Mounting plate/Baseplate

w Power cable

e Wire aerial

r Display

t–i M1–M4 - Memory buttons M1–M4

o MEM/AMS - to save and automatically

search for and save radio

stations

a MEM.SCAN - automatic recall of saved

radio stations

TIMER - controls the timer

programming

d Illuminated clamp strip

f AL2/VOL — - controls the alarm function 2

- Volume reduction

g AL1/VOL + - controls the alarm function 1

- Volume increase

h USER/BAND - User switching,

Radio waveband switching

LIGHT/ - controls the display and

DIMMER clamp strip illumination

k MODE/ - recalls the settings,

LOCK Button lock

l DOWN - Selection button down

1( UP - Selection button up

Battery compartment

2! ON/AOT/ - Switch the radio on/o

OFF controls the switch o timer

Setting up the appliance

First take all appliance components from the

packaging and remove all packing foil and

tape.

Inserting the battery

By inserting the batteries you will avoid the

loss of programmed times and alarm timings

in the event of a possible power outage.

The batteries ensures that the internal clock

continues to run even during a power failure.

When power is restored the correct time ap-

pears automatically in the display r.

Note:

The appliance can also be operated

without a battery.

1. Open the cover of the battery compart-

ment 2) on the underside of the appliance

by turning the cover with a coin to the left

and the limit stop and then lifting it.

2. Now place the battery of the type

CR2032 (supplied) in the battery com-

partment 2). The side with the marking +

should face upwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKRP 1000 A1 IAN 58821 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKRP 1000 A1 IAN 58821

Silvercrest SKRP 1000 A1 IAN 58821 User Manual - German, Dutch, French, Italian - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKRP 1000 A1 IAN 58821 Manual

Product: