796007

Silvercrest SKR D1 C3 - IAN 352706 Manual

19
Zoom out
Zoom in
Previous page
1/80
Next page
20 GB/IE/NI
NOTES:
When the alarm sounds, press [3] to turn
the alarm off.
When Alarm 1 sounds, flashes on the
display [4].
The volume gradually increases.
After the alarm duration has elapsed,
the product will return to standby mode
automatically.
<FM> or <DAB> alarm: When the alarm
sounds, the radio station appears on the
display [4].
Snooze function
In ON mode, press and hold SELECT/
ENTER/SNOOZE [1] while the alarm is
ringing. The alarm reactivates after approx.
9 minutes.
Timer function
The product has a practical kitchen timer with
which you can monitor cooking and baking times,
for example. You can set 2 kitchen timers.
Setting and operating the
kitchen timer
Press TIMER/SLEEP [9] to toggle between
Timer 1 and Timer 2.
Turn VOLUME/START/RESET [7] to select
the countdown time.
Push VOLUME/START/RESET [7] to
confirm. T1 or T2 appears on the display [4].
The countdown starts immediately.
Press TIMER/SLEEP [9] to check the
countdown time.
A warning signal sounds at 30, 15, 10 and
5 seconds before the countdown elapses.
At the end of the countdown, an alarm signal
sounds at maximum volume. Press any key to
turn the alarm off. T1 or T2 disappears from
the display [4].
NOTES:
Timer 1 can be set from 1 minute up to 3 hours
59 minutes in increments of 1 minute. If you set
the countdown between 1 and 4 minutes, the
time will be shown in “mm:ss” format. If you set
the countdown to 5 minutes or more, the time
will be shown in “hh:mm” format.
Timer 2 can be set from 5 minutes up to
3 hours 55 minutes in increments of 5 minutes.
The time will be shown in “mm:ss” format.
If you do not make any changes to the settings
for about 15 seconds, the product will switch
back to the previous operating mode without
saving the settings.
Cancelling the kitchen timer
Briefly press TIMER/SLEEP [9] to select the
timer you wish to cancel (T1 or T2).
Push and hold VOLUME/START/RESET [7]
for 2 seconds until Off appears in the
display [4].
Power reserve
The power reserve is used to store data /
settings if the product has been accidentally
disconnected from the power supply.
In the event of a power failure, the display will
extinguish, the clock will continue working, but
there will be no alarm.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKR D1 C3 - IAN 352706 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKR D1 C3 - IAN 352706 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info