Manual Silvercrest SKR 800 B2 - IAN 279238 (page 35 of 158) (English, German, Dutch, French, Portuguese, Spanish)

659612

Zoom out

Zoom in

1/158

■ 32

│

SKR 800 B2

♦ Hold the mounting plate under the installation location. Ensure that the front

edge of the mounting plate is approx. 3.1cm behind the front of the cup-

board so that the device is connects ﬂush with the cupboard after instal-

lation. The side edges of the mounting plate must spaced approx. 6.3cm

away from adjacent cabinets or walls.

♦ Mark the 4 mounting points with a pencil.

♦ Using a pin or nail, make a small depression at the respective marking

points.

♦ If required, place the supplied spacers

between the cupboard and the

mounting plate. If you are using the spacers, you will need the long mount-

ing screws

♦ Screw the mounting plate tight using the mounting screws provided (

or ).

♦ With the top of the device against the mounting plate, push the device back

until it clicks into place.

♦ Check to ensure that the device is ﬁrmly in position and safely route the

power cable

and the wire aerial .

Dismantling

♦ Pull the device forwards oﬀ the mounting plate .

♦ Unscrew the screws (

or ) on the mounting plate and remove the

mounting plate from the wall cupboard.

Setting up the device

You can also set up the device on a level surface. So not to cover the ventilation

slots and speakers

on the bottom of the device, you must fold out the adjusta-

ble foot

of the device:

♦ Reach into the recess on the side of the adjustable foot and pull it out as far

as it will go.

♦ Select a suitable location for the device (also see the section "Set-up location

requirements").

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKR 800 B2 - IAN 279238 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKR 800 B2 - IAN 279238 Manual

Product: