646945

Silvercrest SKMP 1300 B3 - IAN 276996 Manual

12
Zoom out
Zoom in
Previous page
1/85
Next page
■ 8 
│
 GB
│
IE
SKMP 1300 B3
NOTE
►
If desired, you can mount the fi lling nose 8
onto the lid 9:
– Rotate the lid 9 a little until the opening
is pointing at you.
– Hook the fi lling nose 8 into the eyelets
in the lid 9:
You can now add ingredients, even while the
device is in operation.
7) Turn the rotary switch 3 to the required setting
(cf. section “Speed Levels”).
After you have fi nished using your
appliance
1) Switch the appliance off using the rotary
switch 3.
2) If mounted, remove the fi lling nose 8.
3) Remove the lid 9 from the mixing bowl 6.
4) Push the release lever 2 upwards and move
the swivelling arm 1 to the highest position.
5) Remove the inset 0 q w from the drive shaft
7 by pushing the inset 0 q w against the
drive shaft 7 and simultaneously rotating
it clockwise (direction
). Now you can
remove the inset.
6) Remove the mixing bowl 6 by rotating it
anticlockwise and lifting it off the base.
7) Clean all parts of the appliance (see section
“Cleaning and care”).
Working with the blender
WARNING! RISK OF INJURY!
► Allow hot fl uids to cool to a lukewarm tem-
perature (approx. 30–40°C) before pouring
them into the blender t.
WARNING! RISK OF INJURY FROM
SHARP BLADE / ROTATING DRIVE!
► Never put your hand into the blender t
while it is attached!
► Only remove the blender t when the blade z
is at a complete standstill.
► Only use the blender t with the lid r with
measuring cup e fi rmly in position.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket.
This will prevent the appliance from becoming
switched on again unintentionally.
CAUTION! PROPERTY DAMAGE!
►
Never use the mixing bowl 6 and the
blender t simultaneously! This will overload
the drive!
► When working with the blender t, we
recommend allowing the appliance to cool
down after 3 minutes of operation.
Proceed as follows to prepare the appliance for
operation using the blender t. Refer to fi gure C
on the back fl ap.
1) Push the release lever 2 upwards and push
the swivelling arm 1 down into its working
position.
IB_276995_96_277709_SKMP1300B3_DK_BE_NL.indb 8 22.03.16 15:21
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMP 1300 B3 - IAN 276996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMP 1300 B3 - IAN 276996 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info