Manual Silvercrest SKMH 1100 A1 - IAN 93471 (page 90 of 106) (English, German, Dutch, French)

575400

Zoom out

Zoom in

1/106

Caution! When blending liquids on level

10 or using the pulse button 9, do not

exceed a quantity of 1 litre in blender jug 6,

otherwise liquid may spray out. At speeds

lower than 10, the blender jug may contain

up to 2 l.

Note: Certain operations require a

sufficiency of contents in the blender jug 6

for the appliance to function properly. For

example, when whipping cream always use

at least 200 ml, and when whisking egg

whites use at least two.

7.2 Inserting and removing the blade

assembly

The blender jug 6 may never be used

without the blade assembly 20 because the

assembly 20 constitutes the seal for the

bottom of the jug 6.

Warning! Remember that the

blades of the assembly 20 are

extremely sharp. Never touch them

with your bare hands to avoid

cutting yourself.

Here is how to remove the blade

assembly 20:

1. Lay the blender jug 6 on its side.

2. Press the unlock lever on the

underside of the blender jug 6

so that it is pointing at the open

padlock symbol.

3. Carefully remove the blade

assembly 20.

Here is how to insert the blade

assembly 20:

4. Lay the blender jug 6 on its side.

5. Insert the blade assembly 20 from the

inside. Note that the two protrusions on

the base of the blade assembly 20 have

to be inserted into the two holes in the

base of the blender jug 6.

Caution!

• Make sure that the rubber seal 19 of the

blade assembly 20 is correctly seated,

otherwise the contents are liable to leak

out.

6. To lock the blade assembly 20,

press the unlock lever on the

underside of the blender jug 6

so that it is pointing at the

closed padlock symbol.

Note: Cut large pieces into smaller ones

with an edge length of about 3 – 4cm.

Pieces larger than this may get jammed in

the blades.

7.3 Positioning the blender jug

1. Position the blender jug 6 in its

receptacle 14.

2. Press the blender jug 6 down slightly

until it meshes with the drive gear.

Notes:

– If the gears do not line up and you are

unable to press the blender jug 6

down, you may need to wriggle it

slightly to get the gears of the jug 6 to

slide into the receptacle 14.

RP93471 Küchenmaschine mit Heizung LB2 Seite 88 Donnerstag, 14. August 2014 3:30 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMH 1100 A1 - IAN 93471 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SKMH 1100 A1 - IAN 93471 Manual

Product: