600793
84
Zoom out
Zoom in
Previous page
1/102
Next page
82
The mixer attachment 22 may be used
only at speeds 1 to 4.
The pulse button may not be used
together with the mixer attachment 22.
Never use the blender jug 6 without the
lid 25 in place, as liquid might otherwise
be thrown out.
Do not move the appliance while food
or dough is still inside.
Do not overfill the blender jug 6 as the
contents might otherwise be thrown out.
Overflowing liquid will run onto the
underlay, which is why this needs to be
waterproof.
When steaming, make sure there is
never too much or too little water in the
appliance.
Do not place the appliance immediately
underneath a suspended cupboard, as
steam escapes upwards and might
damage your furniture.
Use only clean drinking water to
generate steam.
The manufacturer and importer accept
no liability for damage caused by an
inadequate power supply or improper
electrical installation in your building. If
in doubt, consult a qualified electrician.
5. Unpacking and setting up
A number of individual parts are given a
protective film of grease In production.
When you use the appliance for the first
time, run it without any foodstuffs to allow
such residues to evaporate.
Note: When you use the appliance for the
first time you may notice a slight odour as
the motor becomes hot. This is harmless.
Make sure the room is adequately
ventilated.
1. Remove the individual parts from their
packaging.
2. Check that the individual parts are all
present (see “1.2 Scope of supplie” on
page 78) and are undamaged.
3. Clean the appliance thoroughly before
using it for the first time (see
“10. Cleaning and maintaining the
appliance” on page 94).
4. Always place the appliance on a level,
dry, non-slip waterproof surface to
prevent it tipping over or sliding off.
Caution! Overflowing liquid will run
onto the underlay, which is why this
needs to be waterproof.
The appliance is now ready to use.
6. Operating the appliance
For safety reasons, the settings described in
this section may only be selected when the
appliance has been fully assembled (see
“7. Using the blender jug” on page 85 or
“8. Steaming” on page 90).
6.1 Connecting the power supply
1. Insert the power supply plug into a
suitable mains socket (see “3. Technical
data” on page 78):
RP114279 Küchenmaschine mit Heizung LB2 Seite 82 Montag, 12. Januar 2015 9:50 09
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKMH 1100 A1 - IAN 114279 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKMH 1100 A1 - IAN 114279 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info