575495
47
Zoom out
Zoom in
Previous page
1/52
Next page
- 45 -
Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (see chapter
„Operating positions“) (Fig. ).
Insert the mixing bowl
y
. The base of the mixing
bowl
y
must engage in the recesses
k
on the
appliance.
Press the unlocking button
f
and bring the swivel
arm
h
into operating position 1 (Fig. ).
Place and hold turnswitch
g
in position P, until
the drive motor
j
remains stationary in the park
position (Fig. ). Should the drive motor not
move it is already at the park position.
Press the unlocking button
f
and bring the swivel
arm
h
into operating position 4 (Fig. ).
Depending on the task to be performed, insert
the kneading hooks
q
, beaters
w
or whisks
e
so that they firmly engage in the drive
j
motor.
Note: The kneading hooks
q
are fitted with a
pastry deflector. Turn the pastry deflector until
the kneading hooks
q
can engage (Fig. ).
Place the ingredients to be processed into the
mixing bowl
y
.
Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.
Press the unlocking button
f
down and bring the
swivel arm
h
to just before operating position 1
(see chapter "Operating positions") (Fig. ),
but do not allow it to engage.
Slide the lid onto the mixing bowl
y
.
Move the swivel arm
h
the final distance to
operating position 1 and let it engage, so that
the lid is firmly seated.
Set the rotary switch
g
to the desired level.
Risk of injury from rotating parts!
NEVER reach into the mixing bowl
y
when it is in use.
Only change accessories when the drive motor
j
is at standstill! After being switched off, the drive motor
j
continues to run for a short time. The appliance
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switchingon of the appliance.
Refilling with ingredients
Turn the appliance off with the rotary switch
g
.
Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
Press the unlocking button
f
down and raise
the swivel arm
h
a little.
Remove the lid.
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 5.
Fill with ingredients.
On task completion
Turn the appliance off with the rotary switch
g
.
Turn the rotary switch
g
to P and hold it firmly
until the drive motor
j
comes to a standstill
(Fig. ).
Press the unlocking button
f
down and raise
the swivel arm
h
a little.
Remove the lid.
Press the unlocking button
f
down and bring
the swivel arm
h
into operating position 4.
Remove the accessories from the drive motor
j
.
Remove the mixing bowl
y
.
Clean all parts (see chapter "Cleaning and care").
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 550 EDS A1 - IAN 75466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 550 EDS A1 - IAN 75466 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info