575486

Silvercrest SKM 500 B1 - IAN 96056 Manual

81
Zoom out
Zoom in
Previous page
1/94
Next page
78
SKM 500 B1
GB
NOTE
► Disconnect the holder with mixing knife 9 fr
om the blender 7 for cleaning!
► Remove the small Philips screw from the underside of the holder with mixing
knife 9.
► Rotate the blender 7 until the arr
ow
on the blender 7 is pointing at
the symbol
on the holder 9. The blender 7 can then be released from
the holder 9.
► Remove the sealing ring 8 fr
om the holder: Slightly lift the sealing ring 8
with a fl at, blunt object (e.g. made from wood) and then carefully guide
the sealing ring 8 over the knife.
Never use sharp or pointed objects for removing the sealing ring 8!
These can damage the sealing ring 8 and therefore cause leaks!
To assemble, place the sealing ring 8 back into the holder 9 and place
the blender 7 onto the holder 9 so that the arrow
on the blender 7
is pointing at the symbol
on the holder 9. Rotate the blender 7 until
the arrow
is pointing at the symbol . Then screw the small Philips
screw back in again.
■ Only clean the motor block o, the po
wer cord and the knife guard for the
cutting knife d with a damp cloth. Dry everything properly before re-using it.
■ Clean the holder with mixing knife 9 and the sealing r
ing 8 in warm
dishwater. Afterwards, rinse all parts with clean water so that no detergent
residue remain on the parts.
■ Clean the cutting knife t, the kneading knife r, the disk adapter e, the
shr
edding disk 0, the grating disk q and the cutting disk w, the emulsifying
disc 4, the lid 3 with pusher 1, the mixing bowl u, the drive shaft i, the
drive shaft adapter z, the blender 7, the blender closure 5, the blender
lid 6 and the dough scraper s in warm dishwater. Afterwards, rinse all
parts with clean water so that no detergent residue remains on the parts.
– You can also clean these parts in the dishwasher! If possible, place the
par
ts in the top basket of the dishwasher. Ensure that the parts are not
trapped in any way.
■ Dry all parts thoroughly before re-using the appliance.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKM 500 B1 - IAN 96056 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKM 500 B1 - IAN 96056 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info