575466

Silvercrest SKHD 1800 A1 - IAN 90873 Manual

54
Zoom out
Zoom in
Previous page
1/58
Next page
52
7. Operating
7.1 Using the appliance for the first time
Insert the mains plug into a wall socket that
complies with the technical data (see
“3. Technical data” on page 47).
7.2 Selecting functions
To select the available functions, turn the
function selector 1 to the relevant symbol.
II High heat setting
ILow heat setting
Fan without heater
Appliance is switched off
As soon as the appliance is working the
indicator light 5 comes on.
7.3 Selecting the temperature
Set with the temperature selector 2 how
strongly the room should be warmed up.
7.4 Swivel function
The appliance has a swivel function.
This causes the appliance to swivel to and
fro, distributing the exiting air more evenly
through the room:
1. To switch the swivel function on, press
the swivel function button 3.
2. To switch the swivel function off, press
the swivel function button 3 again.
7.5 Thermal cut-out
For your safety the appliance has a thermal
cut-out.
If the temperature inside the appliance
becomes too high, the appliance switches
off automatically:
1. Turn the function selector 1 to .
2. Check whether the air inlet or outlet is
obstructed and remove the cause.
If you cannot establish a cause and the
fault occurs repeatedly, have the
appliance repaired or else take it out of
use.
3. Wait for the appliance to cool down.
4. You can then continue to operate it
normally.
7.6 Safety switch
The appliance is protected against
accidental damage by a safety switch 11.
The safety switch 11 is located on the
bottom of the appliance and switches the
appliance off immediately should it fall over:
• Return the appliance to an upright
position. The appliance will switch on
again automatically.
7.7 Frost protection setting
With this function, the appliance prevents
the room temperature falling below the frost
line:
1. Turn the temperature selector 2 to
the frost symbol.
RP90873 Keramikheizlüfter LB1 Seite 52 Donnerstag, 27. Juni 2013 5:48 17
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKHD 1800 A1 - IAN 90873 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKHD 1800 A1 - IAN 90873 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info