575466

Silvercrest SKHD 1800 A1 - IAN 90873 Manual

51
Zoom out
Zoom in
Previous page
1/58
Next page
SKHD 1800 A1 49
If nonetheless liquid does enter the
appliance, unplug the mains plug
immediately and have the appliance
repaired by a qualified specialist. The
contact data can be found in “Service
Centre” on page 55.
• Never insert fingers or any objects
through the protective guards into the
inside of the appliance.
• Never touch the appliance, the mains
cord or the mains plug with moist hands.
• Always pull the mains cord out by the
plug. Never pull it by the cord itself.
• Ensure that the mains cable is not kinked,
twisted or crushed.
• Ensure that the mains cable is not
damaged on sharp edges.
• Keep the mains cord away from hot
surfaces (such as stove eyes).
• If you are not using the appliance for a
prolonged period of time, remove the
plug from the wall socket. Only then is
the appliance completely free of current.
• You should avoid using extension cords.
This is only allowed under very
particular conditions:
– The extension cord has to be suited for
the appliance's amperage.
– The extension cord must not be
installed "loose": it must not be
possible to trip over it or within the
reach of children.
– The extension cord must not by any
means be damaged.
– No other devices other than this
appliance must be connected to the
mains socket, as otherwise
overloading of the power supply
network could occur (multiple sockets
are not allowed!).
4.5 Protection against the danger of fire
Warning! As the appliance
works at high temperatures, please
observe the following safety
information to prevent fire.
• While the appliance is operating, there
must be no flammable objects (e.g.
curtains, paper) in the immediate vicinity
of the appliance.
• When setting up the appliance, maintain
a minimum distance of 0.5 m from other
appliances and the wall.
• Never use the appliance to dry textiles
or other items on, over or in front of the
appliance.
• To avoid overheating, the appliance
must never be covered.
• Never operate the appliance in rooms
where there is a risk of explosion or in
the vicinity of flammable gases or
liquids.
• The appliance must never be placed
immediately beneath a wall socket, as
the heat it generates could damage the
electrical installation.
• Always check that air can freely enter
and escape. Heat might otherwise build
up inside the appliance.
• Clean the dust filter 10 regularly (see
“6.2 Cleaning the dust filter” on
page 51). A clogged dust filter could
cause a build up of heat.
• Never leave the appliance running
when it is unattended. The presence of
odour is almost always an indication of
damage. If you notice any such odour,
unplug the mains plug immediately and
have the appliance inspected. The
contact data can be found in “Service
Centre” on page 55.
RP90873 Keramikheizlüfter LB1 Seite 49 Donnerstag, 27. Juni 2013 5:48 17
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKHD 1800 A1 - IAN 90873 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKHD 1800 A1 - IAN 90873 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info