646955

Silvercrest SKF 2800 A1 - IAN 95885 Manual

53
Zoom out
Zoom in
Previous page
1/62
Next page
SKF 2800 A1 51
4.8 Handling batteries
Warning!
To prevent a risk of explosion,
normal batteries must not be
charged, heated or disposed of by
burning.
• Never try to open the batteries.
To prevent injury if battery acid has
leaked out, avoid contact with the skin,
eyes and mucous membranes. In the
event of contact with the acid, rinse the
affected areas immediately with plenty
of clean water and contact a doctor at
once.
Caution! To avoid damaging the
appliance and to ensure it functions
correctly, please note:
• Only use type AG13 batteries.
5. Before using for the first time
1. Please clean the individual parts of the
deep-fat fryer thoroughly (see
“9. Cleaning and storing” on page 54).
2. Then carefully dry the individual parts.
6. Before frying
1. Place the deep-fat fryer on a level and
stable surface.
2. Unwind the mains cable completely.
Caution! Make sure that the cable does
not come into contact with the hot parts of
the fryer so that it is not damaged.
3. Press the unlock button 7 to release the lid.
The lid 4 will open.
4. Move up the handle of the frying
basket 1 until it audibly engages.
5. Remove the frying basket 14.
6.1 Add the oil or fat
You should either use liquid frying oil or
solid frying fat.
You should melt solid frying fat in a frying
pan or saucepan before adding it to the
fryer.
Note: Never mix different types of fat or oil!
1. Add oil or melted fat up to the upper
"MAX" marking of the fat container 13
in the dry and empty fryer.
Note: If you only want to fry small
quantities, a bit less oil or fat may well
be enough. However the items to be
fried must always be completely covered
and the fat or oil must reach at least as
far as the lower "MIN" marking of the fat
container 13.
2. Insert the plug in a socket.
6.2 Melt existing fat
If the fryer already contains solidified fat
from an earlier frying session, it must be
melted in the fryer. Do this very carefully so
that the melting fat does not start to spit or
the fryer does not overheat.
1. Insert the plug in a socket.
RP95885 Fritteuse LB2 Seite 51 Montag, 17. Februar 2014 2:35 14
… 53 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-skf-2800-a1---ian-95885

Reset search

  • Bonjour,
    je cherche à remplacer l'élément de commande chauffant (avec bouton reset).
    Sur a pièce, j'ai comme référence WQS-245 A 1311/135-6/1S-24505 16A/V,
    pouvez vous m'indiquer où puis-je la trouver?
    Merci pour votre aide.
    Submitted on 1-2-2017 at 09:21

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2800 A1 - IAN 95885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2800 A1 - IAN 95885 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info