575429

Silvercrest SKF 2300 B2 - IAN 75818 Manual

81
Zoom out
Zoom in
Previous page
1/84
Next page
78
SKF 2300 B2
GB
Troubleshooting
PROBLEM POSSIBLE CAUSE
POSSIBLE
SOLUTIONS
The appliance does not
function.
oder
The control lamp integrated
into the On/Off switch
0
does not glow.
The appliance is not connected
with a mains power socket.
Connect the appliance to
a mains power socket.
The appliance is damaged.
In this case, contact
Customer Services.
The On/Off switch
0 has not
been activated.
Press the On/Off switch 0.
The heat protection function
has been activated.
1. Remove the plug and
allow the appliance
to cool down.
2. Press the reset button
t
on the rear of the con-
trol/heating element 5.
The appliance has switched
itself off during use and
does not allow itself to be
switched back on.
The heat protection function
has been activated.
1. Remove the plug and
allow the appliance to
cool down.
2. Press the reset button
t
on the rear of the con-
trol/heating element 5.
The green control lamp
9
does not glow.
The programmed temperature
for the cooking oil/fat has not
been reached.
Wait a few minutes until the
required temperature has
been reached.
If the malfunction cannot be corrected with the above suggestions, or if you have determined
that the malfunction may have other causes, please make contact with our Customer Service.
Appendix
Disposal of the appliance
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
IB_75818_SKF2300B2_LB2.indb 78IB_75818_SKF2300B2_LB2.indb 78 27.08.12 11:2227.08.12 11:22
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 B2 - IAN 75818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 B2 - IAN 75818 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info