575421

Silvercrest SKF 2300 A1 - IAN 66928 Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
- 9 -
Attention!
Always close the appliance lid before lowering the
frying basket 3 into the hot oil or fat. There is a risk
of fire caused by splashing fat!
• Always insert the foodstuffs as slowly and care-
fully as possible into the deep fryer, as deep
frozen foods can cause the oil or fat to bubble
heftily and abruptly.
How to remove undesirable after-tastes
Some foodstuffs, especially fish, release fluids when
being fried. These fluids collect in the oil or fat and
can influence the smell and taste of fried foods that
are later cooked in the same oil or fat.
Proceed as follows to again obtain a neutral tasting
oil or fat:
• Heat the fat or oil to 160°C and and place two
thin slices of bread or a couple of small sprigs of
parsley into the frying basket 3.
Attention!
Absolutely close the appliance lid before lowering
the frying basket 3 with the parsley or the bread
into hot oil or fat. Splattering fats can cause serious
burns.
• Close the appliance lid and then lower the
frying basket 3 into the fat.
• Wait until the oil or fat is no longer bubbling and
remove the bread or parsley with a skimmer. The
oil or fat now has a neutral taste once again.
Healthy Nutrition
Nutritional experts recommend the use of vegetable
oils and fats containing unsaturated fatty acids (e.g.
Linol acid). However, these oils and fats lose their
positive characteristics faster than other oils and
must therefore be exchanged more frequently.
Orientate yourself on the following guidelines:
• Exchange the oil or fat regularly. If you use the
deep fryer mainly to prepare chips and strain
the oil or fat after every use, it can be used 10
to 12 times.
• However, do not use an oil or fat for longer than
six months. Always follow the instruction given
on the packaging.
• As a general rule, oils and fats can be used for
a lesser time if you mainly fry foods with lots of
proteins, such as meat or fish.
• Do not mix fresh oil with old oil.
• Change the oil or fat if it foams on being heated,
it develops a strong taste or odour, it becomes
dark and/or it develops a syrupy consistency.
Overheat Protection
In a case of overheating, the heat protection function
switches the appliance off.
This can happen if there is no, or not sufficient, oil or
fat in the deep fryer or when solid cooking fats are
being molten in the appliance.
With solid cooking fats the heating element cannot
disburse the heat created fast enough.
If the heat protection function has switched the ap-
pliance off, please proceed as follows:
• Allow the appliance to cool down.
• Allow the oil or fat to cool down.
• Carefully press the reset button e on the rear
side of the operating element 5 with a small
pointed object. The appliance can now be used
again.
IB_66928_SKF2300A1_LB6 28.04.2011 14:57 Uhr Seite 9
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SKF 2300 A1 - IAN 66928 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SKF 2300 A1 - IAN 66928 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SKF 2300 A1 - IAN 66928

Silvercrest SKF 2300 A1 - IAN 66928 User Manual - German, Dutch, French, Italian - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info